- Description
Details
JBL CBT 1000 Passive Column Speaker for Installation with 24 x 1" Drivers
1500W Power Handling, Overload Protection and Constant Beamwidth TechnologyThe JBL CBT1000 full-range cabinet and CBT1000E extension cabinet provide versatile, adjustable vertical pattern selections for aligning the coverage to the geometry of a room. Independent selection of four "pattern up" coverage angles and four "pattern down" coverage angles combine to provide 16 different vertical coverage combinations. In its asymmetrical settings, CBT1000 sends more sound toward the far listeners, helping to counteract sound level differences between near are far listeners, while simultaneously being capable of providing smooth down-fill that doesn’t overpower those in the front. In the horizontal plane, the system’s patent-pending horizontal gradient waveguide provides tapered coverage to reach the front and rear corners of the room while minimizing over-splash. Combined with a bass response below 40 Hz, the CBT1000 system provides excellent, clear and powerful full-bandwidth coverage of a room from a single loudspeaker.
Twelve 6.5 high-excursion, low frequency drivers and 24 high-power tweeters give the CBT1000 line array system the capability of delivering 130 dB continuous output with 3000W of power handling for high output applications. The CBT1000 series is designed to offer a single speaker solution for venues that might otherwise use larger point-and-shoot speakers. It incorporates technical advancements that provide a level of user friendliness that simplifies the challenges of delivering great sound.- Features
Features
- Asymmetrical vertical coverage sends more sound toward far area of room to make front-to-back sound levels more consistent
- Components: Twenty-four (24) 25 mm (1") extra-high-power soft dome tweeters and six (6) 165 mm (6.5") high-excursion LF drivers arranged coaxially
- Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out of coverage lobing
- Vertical pattern coverage is individually adjustable through a range of four (4) "Pattern Up" angles and four (4) "Pattern Down" coverage angles for a total of sixteen (16) different coverage combinations, all without the use of external DSP processing
- Patent-pending Tapered Horizontal Waveguide provides a continuously varying horizontal dispersion (very wide for short-throw, narrower for long-throw) delivering superior coverage in both the front and rear corners of a room
- Single-speaker room coverage at high SPL, with little over-splash and strong bass response down to below 40 Hz
- Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode
- Swivel (pan)/tilt wall bracket included
- Specification
Components Six (6) 165 mm (6.5 in) LF Drivers Twenty-Four (24) 25 mm (1 in) HF Drivers Frequency Range (-10 DB) 45 Hz - 20 kHz Sensitivity (2.83V@ 1m) 102 dB (at Highest Sensitivity Setting: “Point” Pattern Up, “Point” Pattern Down, “Speech” Voicing, in Free Space); 95 dB (at Lowest Sensitivity Setting: “Medium” Pattern Up,“Downfill” Pattern Down, “Music” Voicing in Free Space) Nominal Impedance 4 ohms (4 ohms above 1 kHz; 8 ohms Below 800 Hz) Power Capacity 1500W (6000W Peak), 2 hrs; 1000W (4000W Peak), 100 hrs Maximum Input Voltage 65.0 Volts RMS (2 hrs), 130.0 Volts Peak Max SPL Highest Directivity Setting: (“Point” Pattern Up, “Point” Pattern Down) with “Speech” Voicing: 131 dB Continuous Average Pink Noise, 134 dB Continuous Program, 137 dB Peak Max SPL Highest Directivity Setting: (“Point” Pattern Up, “Point” Pattern Down) with “Speech” Voicing: 127 dB Continuous Average Pink Noise, 130 dB Continuous Program, 133 dB Peak Max SPL Lowest Directivity Setting: (“Medium” Pattern Up, “Downfill” Pattern Down) with “Speech” Voicing: 128 dB Continuous Average Pink Noise, 131 dB Continuous Program, 134 dB Peak Max SPL Lowest directivity Setting: (“Medium” Pattern Up, “Downfill” Pattern Down) with “Music” Voicing: 124 dB Continuous Average Pink Noise, 127 dB Continuous Program, 130 dB Peak Recommended High-Pass 35Hz, 24 dB/oct or greater Low Frequency Drivers 6 pcs, 165 mm (6.5 in) drivers, lightweight neodymium motors, 50 mm (2.0 in) diameter voice coils, copper-capped pole tips to minimize flux modulation and linearize inductance, 16 mm (0.63 in) long coil for high linear drive and high power handling, damped blended textile surround, coated cones for moisture, UV and salt resistance. Magnetically shielded High Frequency Drivers 24 pcs, 25 mm (1 in) drivers, neodymium, encased magnet and coated diaphragm for moisture, UV, and salt resistance Enclosure Fiberglass Reinforced ABS Cabinet, Powder Coated 1050 Aluminum Grille Outdoor Capability IP-55 rated, per IEC529, when installed with optional MTC-PC2 cover. ASTM G85 for acid-air/salt-spray (200 hrs) Colors Black (RAL9004) or White (-WH) (RAL9016) Insert Points 14 individual M8 inserts on back panel (20 mm deep) for use with swivel (pan)/tilt bracket(s), forged-shoulder steel eyebolts, swivel rings, and after-market third-party brackets, plus 4 individual M8 inserts on top and 4 on bottom of cabinet end-caps Mounting Included two-part swivel (pan)/tilt wall bracket provides continuously variable +/- 45° left-right swivel aiming (at no up/down tilt), +/- 15° tilt in 1° fixed increment points. Fourteen threaded mounting points located on back panel of cabinet conform to industry standard rectangular 5" x 2.75" pattern for legacy OmniMount® and other compatible third-party brackets. Four threaded mount points on the top end-cap and four on the bottom end-cap. Threaded mounting points can be utilized for suspension Included Accessories Two-Piece Swivel (Pan)/Tilt Wall Bracket Optional Accessories MTC-PC2 terminal panel cover MTC-CBT1K-ACC1 Accessory kit includes: 2 pcs MTC-CBT-FM3 flush-mount brackets 1 pc MTC-CBT-OS3 offset bracket (for CBT 1000+1000E array – works in conjunction with CBT 1000E’s included Coupler Plate for locating CBT 1000E extension cabinet above CBT 1000 instead of below it) MTC-CBT-SUS3 CBT Series suspension bracket kit (2 pcs included to provide top and bottom attachment points) Dimensions (H x W x D) 40.2" (1020 mm) x 9.9" (250 mm) x 13.6" (345 mm) Net Weight 54 lbs (24.5 kg) Shipping Weight 85 lbs (38.6 kg) - Documents
- In The Box
In The Box
- (1) CBT 1000
- (1) Two-Piece Swivel (Pan)/Tilt Wall Bracket
- Reviews
Write Your Own Review
GET RELIABLE FREE SHIPPING* WITH CODE: FREESHIP
*Valid On Orders $49.99 and Up - Click Here For More Details
Quote 0 item
Recently added item(s) ×
You have no items in your quote.
Cart 0 item
Recently added item(s) ×
Your cart is empty.
