The audio Digital Signal Processor (DSP) with DANTE is equipped with several core technical features to simulate the work of an audio engineer. It consists of 16 analogue inputs and 16 analogue outputs, 16 DANTE inputs and 16 DANTE outputs, USB audio, 8 General Purpose Input/Output (GPIO) connections, RS-232, RS-485, and IP control. It is equipped with advanced audio processing modules including acoustic echo cancellation, noise suppression, and auto mixing.
The analogue-to-digital (A/D) and digital-to-analogue (D/A) converters on the input and output stages feature a 48 kHz sampling rate and a bit depth of 24 bits, providing high-definition audio sampling and processing. It also has a dynamic range of 110 dB and a maximum level of +24 dBu. Input and output processing modules include expanders, compressors, Acoustic Gain Compensation (AGC), parametric EQ, feedback suppression, ducker, gate, ambient noise compensation, graphic EQ, and delay.
DSP-based audio management, routing, processing, and control are facilitated via a computer running the GUI software. The Alfatron DSP controller software is a Windows-based application used to configure and control the unit. The software provides parameter adjustments and peripheral accessory settings for all modules, including RS-232, RS-485, and click-and-drag panel configuration. The user interface allows the engineer to customize the controls so that integrators, on-site technicians, or end users can operate the system. Advanced security features allow end users to access only the controls permitted by the engineer or designer.
Most Alfatron products come with a 7-year limited warranty. Register your product with Alfatron to receive an additional 3-year extended warranty on eligible products, for 10 years of total coverage.
