SoundTube IPD4-CM62-KIT Dante Enabled PoE 6.5" IP Addressable In-Ceiling Speaker System with IPD4 Master and 3 CM62 Passive Speakers
Usually arrives in 5-9 business days.
The Alfatron ALFC-657D is a 6.5" Dante 2-way in-ceiling speaker system with a 30W PoE-powered Master speaker, 30W Slave speaker, built-in 2-channel amplifier, and aimable 1" silk dome tweeter for high-quality distributed audio.
The ALFC-657D is a 6.5" Dante 2-way in-ceiling speaker system designed for convenient, high-quality distributed sound reinforcement. The system consists of one Dante-enabled Master speaker, ALFC-657DM, and one secondary Slave speaker, ALFC-657DS. The Master speaker features a built-in 2-channel, 2 x 30W amplifier and connects directly to the Dante audio network, providing amplified output to the Slave speaker. The complete pair is powered through a PoE network switch, simplifying installation by combining network connectivity and power distribution.
Each speaker features a 6.5" full-range woofer with a moisture- and water-resistant composite diaphragm, plus a 1" silk dome tweeter with an adjustable angle for precise high-frequency coverage. The 2-way coaxial design delivers a wide, flat frequency response with low distortion, rich midrange, and detailed high frequencies. A metal back can, weather-resistant construction, and UV and moisture protection make the ALFC-657D well suited to a variety of commercial installation environments.
The flush-mounted, borderless magnetic grille provides a clean, discreet appearance while allowing easy installation and maintenance. With Dante audio networking, PoE power, a built-in 2-channel amplifier, and a dedicated Slave speaker, the ALFC-657D provides an efficient solution for distributed audio applications where streamlined installation and reliable sound performance are required.
| ALFC-657DM Master Speaker: | |
|---|---|
| Frequency Response | 65 Hz - 20 kHz, (±3 dB) |
| Impedance | 8 Ohms |
| Sensitivity | 89 dB 1M / 1 W |
| Max SPL | 111 dB |
| RMS Power | 30 watts |
| PEAK Power | 60 watts |
| Amplifier Power | 2 x 30 watts |
| Transmission Speed | 100 M/1000 M bps |
| Installation | Flush-mounted |
| Power Supply | RJ45, 802.3af/802.3at/802.3bt compatible |
| Installation Depth | 246 mm round hole, 197 mm depth |
| Bass | 6.5-inch (polypropylene) composite body + NBR rubber |
| Tweeter | 1-inch silk membrane, neodymium magnet, 360° rotatable. Coaxially mounted |
| Audio Input Interface | Input: RJ45 Output: 2-pin Phoenix connection (connects to slave speaker-ALFC-657-DS) |
| Accessories | Safety cable |
| ALFC-657DS Slave Speaker: | |
| Frequency Response | 65 Hz - 20 kHz, (±3 dB) |
| Impedance | 8 Ohms |
| Sensitivity | 89 dB 1W / 1 M |
| Max SPL | 111 dB |
| RMS Power | 30 watts |
| PEAK Power | 60 watts |
| Installation | Flush-mounted |
| Installation Depth | 246 mm round hole, 197 mm depth |
| Bass | 6.5-inch (polypropylene) composite body + NBR rubber |
| Tweeter | 1-inch silk membrane, neodymium magnet, 360° rotatable. Coaxially mounted |
| Audio Input Interface | 2-pin Phoenix connector, powered from Dante master speaker-ALFC657-DM |
| Accessory | Safety cable |
| Dimensions (Dia x H) | 9.69" (246 mm) x 7.76" (197 mm), Magnetic Speaker Grill 10.94" (278 mm) |
| Weight | 6.39 lbs (2.9 kg) |
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.