Ashly Audio KLR 3200 2-Channel High Performance Power Amplifier 2 x 650W @ 8 Ohms
Usually arrives in 5-9 business days.
The Ashly KLR-2000 Power Amplifier has been optimized to provide reliable audio performance with sonic perfection. Covering a power range from 1000-2500 Watts per channel at 2 Ohms the KLR-2000 is perfectly suited for a wide range of sound reinforcement.
The Ashly KLR-2000 high-performance power amplifier has been optimized to provide reliable audio performance with sonic perfection. Covering a power range from 1000 to 2500 Watts per channel at 2 Ohms the KLR-2000 is perfectly suited for a wide range of sound reinforcement. All four KLR amplifiers are optimized to deliver high levels of sustained power, extraordinary audio performance, and road-proven reliability into 2, 4, or 8 Ohm loads and are housed in a uniform, rugged 2RU chassis. Each KLR amplifier uses a switch mode power supply which assures flawless lows, punchy mids and pristine highs. The output topology of the KLR-2000 is Class-AB, while the KLR-3200, 4000, and 5000 are a 2-step Class-H design.
KLRs are quiet with signal-to-noise ratio ratings from >108 dB to >110 dB across all models. They're also versatile, each with a 3-position gain switch for both channels, a 3-position mode switch (bridged, stereo or parallel mono) and a 3-position 12dB/oct HPF switch (30Hz, 50Hz or off).
| 8Ω, 20 Hz - 20 kHz, 1% THD | 350W |
|---|---|
| 4Ω, 20 Hz - 20 kHz, 1% THD | 600W |
| 2Ω, 20 Hz - 20 kHz, 1% THD | 1000W |
| Bridged Mono Mode 4Ω, 20 Hz - 20 kHz, 1% THD | 2000W |
| Idle | 0.99A |
| 1/8th Power Pink Noise | 9.7A |
| 1/3 Power Sine Wave | 14.9A |
| S/N (20 Hz-20 kHz, unweighted) | >108dB |
| Idle (BTU/hr) | 164 |
| 1/8th Power Pink Noise (BTU/hr) | 1876 |
| 1/3 Power Sine Wave (BTU/hr) | 2880 |
| Input Gain Switch | 1V, 20dB, 26dB |
| (20Hz-20kHz, rated power @ 8Ω unweighted) | >108dB |
| Output Circuitry | Class AB |
| Frequency Response 1W @ 8Ω 20Hz – 20kHz | +0.3dB5Hz – 70kHz |
| Damping Factor – 100Hz @ rated power @8Ω | >380 |
| THD 20Hz-20kHz, 10dB below rated output @ 4Ω | |
| Input Impedance | 12 kΩ, balanced |
| HPF | 30Hz, 50Hz, Off (12dB/Oct) |
| Amplifier Protection | Output Overcurrent, DC Output, Chassis Temperature, Mains Breaker |
| Cooling | Variable Speed Fan, Front-to-Rear Air Flow |
| Front Panel Indicators | Protection/Clip, Signal, Power |
| Attenuators | Per Channel, Front Panel |
| Input Connectors, each channel | 3-pin Euroblock, XLR, ¼” TRS Phone Jack |
| Output connectors, each channel | Four pin Speakon type |
| Operating Temperature/Humidity | Temperature: -10C to +40C / Humidity: 0% to 90% |
| Power Cable Connector | 3-prong NEMA 5-15 (5-20 for KLR-5000) |
| Operating Temperature/Humidity | Temperature: -10C - +40C / Humidity: 0% - 90% |
| Dimensions (H x W x D) | 3.5” (88 mm) x 19" (482 mm) x 16" (407 mm) |
| Weight | 26.2 lbs (11.9 kg) |
| Shipping Weight | 31 lbs (14 kg) |
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.