Ashly Audio KLR-2000 2-Channel High Performance Power Amplifier 2 x 350W @ 8 Ohms
Usually arrives in 5-9 business days.
The Ashly KLR 3200 high-performance power amplifier is optimized to provide reliable audio performance with sonic perfection. Covering a power range from 1000 to 2500 Watts per channel at 2 ohms the KLR 3200 is perfectly suited for a wide range of sound reinforcement.
The KLR 3200 high-performance power amplifier is optimized to provide reliable audio performance with sonic perfection. Covering a power range from 1000 to 2500 Watts per channel at 2 Ohms the KLR 3200 is perfectly suited for a wide range of sound reinforcement. All four KLR amplifiers are optimized to delivers high levels of sustained power, extraordinary audio performance, and road-proven reliability into 2, 4, or 8 Ohm loads and are housed in a uniform, rugged 2RU chassis. Each KLR amplifier uses a switch mode power supply which assures you of flawless lows, punchy mids and pristine highs. The output topology of the KLR-2000 is Class-AB, while the KLR-3200, 4000, and 5000 are a 2-step Class-H design.
The KLR Series are high-efficiency, high-power 2-channel amplifiers that are the ideal choice for high-output speaker systems, line arrays, dual 18" subwoofers and much more. They are quiet with signal-to-noise ratio ratings from >108 dB to >110 dB across all models. They're also versatile, each with a 3-position gain switch for both channels, a 3-position mode switch (bridged, stereo or parallel mono) and a 3-position 12dB/oct HPF switch (30Hz, 50Hz or off).
| Power Output Per Channel | |
|---|---|
| 8Ω, 20 Hz - 20 kHz, 1% THD | 650W |
| 4Ω, 20 Hz - 20 kHz, 1% THD | 1100W |
| 2Ω, 20 Hz - 20 kHz, 1% THD | 1600W |
| 70V Output, 20Hz - 20kHz, 1% THD | 800W |
| Bridged Mono Mode 4Ω, 20 Hz - 20 kHz | 3200W |
| Line Current Draw | |
| Idle | 0.92A |
| 1/8th Power Pink Noise | 11.4A |
| 1/3 Power Sine Wave | 16.6A |
| Thermal Dissipation (all channels driven @ 4Ω) | |
| Idle (BTU/hr) | 136 |
| 1/8th Power Pink Noise (BTU/hr) | 2063 |
| 1/3 Power Sine Wave (BTU/hr) | 3001 |
| Input Gain Switch | 1V, 2 6 dB, 32 dB |
| Signal to Noise Ratio | |
| (20Hz-20kHz, rated power @ 8Ω unweighted) | >109 dB |
| Output Circuitry | 2 Step Class H |
| Frequency Response 1W @ 8Ω 20Hz – 20kHz | +0.3dB5Hz – 70kHz |
| Damping Factor – 100Hz @ rated power @ 8Ω | >380 |
| THD 20Hz-20kHz,10 dB below rated output @ 4Ω | |
| Input Impedance | 12 kΩ, balanced |
| HPF | 30Hz, 50Hz, Off (1 2dB/Oct) |
| Amplifier Protection | Output Overcurrent, DC Output, Chassis Temperature, Mains Breaker |
| Cooling | Variable Speed Fan, Front-to-Rear Air Flow |
| Front Panel Indicators | Protection/Clip, Signal, Power |
| Attenuators | Per Channel, Front Panel |
| Input Connectors, each channel | 3-pin Euroblock, XLR, ¼" TRS Phone Jack |
| Output connectors, each channel | Four pin Speakon type |
| Operating Temperature/Humidity | Temperature: -10C to +40C / Humidity: 0% to 90% |
| Power Cable Connector | 3-prong NEMA 5-15 (5-20 for KLR-5000) |
| Dimensions (H x W x D) | 3.5" (88 mm) x 19" (482 mm) x 16" (407 mm) |
| Weight | 26.4 lbs (12 kg) |
| Shipping Weight | 33 lbs (15 kg) |
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.