- Description
Details
The Ashly Pema 4125 DSP processor features a new sleek look, 4-channel at 125 watts per channel at 4Ω. The Pema is a matrix mixer with 8-in x 8-out, where any input can be assigned to any output or outputs. Pema is a digital signal processor. In addition to the full Protea suite of DSP settings, we have added four new features to Pema—gain sharing automatic microphone mixing, an automatic feedback suppressor, ambient noise detection and adjustment and a real-time clock with an event scheduler.
The Pema 4125 features Ashly's energy efficient Class-D amplifier topology with a switching power supply—and is over 80% energy efficient out of the box. Maximize the energy efficiency of your audio system by using the event scheduler to either put the Pema in stand-by mode or turn it off completely.
- Features
Features
- 4 channel amplifier - 125 watts per channel
- Lo-Z, 25V, 70V, and 100V models available
- 8-in x 8-out sophisticated matrix mixing
- 8 built-in mic pre's
- Gain sharing automatic microphone mixing (Automixer)
- Automatic feedback suppression
- Ambient noise compensation
- Dedicated telephone/PBX input
- Dual RCA and balanced euroblock inputs
- Post DSP AUX line level outputs
- Stereo summed to mono
- Event scheduling (RTC)
- Adjustable HP/LP filters
- Built-in pink/white noise & sine wave generator
- Extensive signal processing: Full suite of Ashly NE Series DSP
- Hot-plug DSP placement, 96kHz or 48kHz sample rate
- 32-Bit SHARC DSP, 24-bit A/D~D/A audio resolution
- 15V phantom power
- Full control using Ashly software over 10/100 baseT Ethernet
- Easy and intuitive user interface
- Automatic DHCP network IP configuration
- Euroblock connectors for preset recall, DC remote level control and data in/out
- External control via Ashly standard wall remotes or Ashly Ethernet wall remotes
- Level control via variable DC control voltage
- Stand-By mode activation via contact closure
- Multi-level Security
- Specification
8Ω 75W power output per channel (20Hz-20kHz 1% THD) 4Ω 125W power output per channel (20Hz-20kHz 1% THD) Low Z Output (Bridge Mode) 8Ω: 250W 920Hz–20kHz, 1% THD, All Channels Driven) Line Current Draw Standby Mode: 190mA
Idle (no signal): 590mATypical (1/8 power pink noise) 1.70A Maximum (1/3 power sine wave) 3.72A Thermal Dissipation (all channels driven) Standby Mode: 46.7
Idle (no signal): 123Input Sensitivity 3.2Bbu Voltage Gain 26dB Damping Factor >250 (8 Ohm load, <1kHz) Distortion <0.5% (SMPTE, typical)
<0.5% (THD-N, typical, 8 Ohm, 10dB below rated power, 20Hz–20kHz)Channel Separation -80dB (dB from full output, 1kHz) Signal to Noise >102dB (20Hz–20kHz, Unweighted) Frequency Response 20Hz-20kHz, +/-1dB Mic/Line Input Impedance 4.8K Mic/Line Maximum Input Level +21dBu Mic/Line Preamp Gain 0, +20dB, +40dB, +60dB Mic/Line Phantom Power +15V, channel Summed Mono 3.16k Ohm (Input Impedance)
+11dBu (Maximum Input Level)Channel 1 TEL-PBX 3.9k Ohm (Input Impedance)
+21dBu (Maximum Input Level)Preamp Output Maximum Level +8dBu AUX Output Maximum Level +20dBu Balanced Mic/Line Input Connector Euroblock 3.5 mm Unbalanced Summed Mono Input Connector Dual RCA Channel 1 TEL-PBX Input Connector Euroblock 3.5 mm Preamp/AUX Output Connector Euroblock 3.5 mm Speaker Output Connector Euroblock 7.62 mm Dimensions (H x W x D) 3.50" (89 mm) x 19" (483 mm) x 16.84" (428 mm) Unit Weight 23.5 lbs (10.7 kg) Shipping Weight 30.9 lbs (14 kg) - Documents
Documents
- Reviews
Write Your Own Review