Ashly Audio Pema 8250 8 Channel Power Amplifier 8 x 250W @ 4 ohms with Protea DSP
Usually arrives in 5-9 business days.
The Ashly Pema 8125 DSP Processor with it's new sleek look, is a Protea-Equipped Media Amplifier is an 8-channel at 250 Watts or 125 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out matrix mixer, where any input can be assigned to any output or outputs.
The Ashly Pema 8125 DSP Processor with it's new sleek look, is a Protea-Equipped Media Amplifier is an 8-channel at 250 Watts or 125 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out matrix mixer, where any input can be assigned to any output or outputs. Pema is a digital signal processor. In addition to the full Protea™ suite of DSP settings, we have added four new features to Pema—gain sharing automatic microphone mixing, an automatic feedback suppressor, ambient noise detection and adjustment and a real-time clock with an event scheduler.
Pema features Ashly's energy efficient Class-D amplifier topology with a switching power supply—and is over 80% energy efficient out of the box. Maximize the energy efficiency of your audio system by using the event scheduler to either put the Pema in stand-by mode or turn it off completely.
| 8Ω 20Hz-20kHz 1% THD | 75W |
|---|---|
| 4Ω 20Hz-20kHz 1% THD | 125W |
| Line Current, Standby Mode | 290ma |
| Line Current, Idle (no signal) | 565ma |
| Line Current, Typical (1/8 power pink noise) | 2.78A |
| Line Current, Maximum (1/3 power sine wave) | 5.78A |
| BTU/hr, Standby Mode | 63.8 |
| BTU/hr, Idle (no signal) | 187 |
| BTU/hr, Typ (1/8 power pink noise) | 444 |
| BTU/hr, Max (1/3 power sine wave) | 481 |
| Input Sensitivity (low Z models) | 3.2Bbu |
| Voltage Gain (low Z models) | 26dB |
| Damping Factor (8 ohm load, | >250 |
| Distortion (SMPTE, typical) | |
| Distortion (THD-N, typical) 8Ω 10dB below rated power | |
| Channel Separation (dB from full output, 1kHz) | -80dB |
| Signal to Noise (20Hz-20KHz, unweighted) | >102dB |
| Frequency Response | 20Hz - 20kHz, +/-1dB |
| Mic/Line Input Impedance | 4.8K |
| Mic/Line Maximum Input Level | +21dBu |
| Mic/Line Preamp Gain | 0, +20dB, +40dB, +60dB |
| Mic/Line Phantom Power | +15V, channel |
| Summed Mono Input Impedance | 3.16K |
| Summed Mono Maximum Input Level | +11dBu |
| TEL-PBX Input Impedance | 3.9K |
| TEL-PBX Maximum Input Level | +21dBu |
| Preamp Output Maximum Level | +8dBu |
| AUX Output Maximum Level | +20dBu |
| Balanced Mic/Line Input Connector | Euroblock 3.5 mm |
| Unbalanced Summed Mono Input Connector | Dual RCA |
| Channel 1 TEL-PBX Input Connector | Euroblock 3.5 mm |
| Preamp/AUX Output Connector | Euroblock 3.5 mm |
| Speaker Output Connector | Euroblock 7.62 mm |
| Dimensions (H x W x D) | 3.50" (89 mm) x 19" (483 mm) x 16.84" (428 mm) |
| Unit Weight | 25 lbs (11.3 kg) |
| Shipping Weight | 32.3 lbs (14.7 kg) |
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.