The Atlas Power ECM-20M is a 20A Power Conditioner and AC Spike Suppressor that is designed to be used as a standalone unit or in conjunction with an ECS unit up to 1000ft away. The ECM-20M features AC Spike and Surge Suppression, AC Mains Voltage monitoring, EVS circuitry, and Remote Activation. In addition, the ECM-20M features noise filtering for removing unwanted Radio Frequency Interference (RFI) and EMI filters to reduce noise from Electromagnetic Interference (EMI) caused by items such as electric motors or switching power supplies. The ECM-20M is designed to be conveniently housed in the ECM-RACEWY6 for the addition of multiple outlets directly connected to the AC mains from the electrical panel.
| Switched Outlets | Two, 20A |
|---|---|
| Spike & Surge Suppression | H-N, N-G, H-G |
| Manual Override | Slide switch |
| Extreme Voltage Shutdown | ECM-20M Model only, (EVS) Below 102V or Above 132V |
| Connectors | 5 Position Phoenix Euro Block Style |
| Fuse Protection | 20A Slow Blow |
| DCV Remote Trigger | 5 – 24DCV |
| Remote Trigger | SPST Contact |
| Status Signals | Output for Voltage and Current Data (ECM-20M modelonly) |
| Indicators | Incoming AC, Active, AC Fault (ECM-20M model only) |
| AC Mains Interconnect | Screw terminal block |
| Current Rating | 15 amps |
| Operating Voltage | 102 - 132 VAC |
| High Voltage Surge Protection | Trigger at 133 VAC, 1ms typically (When Used WithECS-6RM) (ECM-20M model only) |
| Spike & Surge Suppression | H-N, N-G, H-G |
| Low Voltage Protection | Trigger 101 VAC, 1ms typically (When Used With ECS-6RM) (ECM-20M model only) |
| Spike Protection Modes | Circuitry on incoming AC Mains. |
| Minimum Spike Clamping Voltage | 460 VRMS @ 3,000 amps |
| Maximum Spike Clamping Voltage | 6000V |
| Maximum Spike Clamping Response Time | 1 nanosecond |
| Spike Clamping Voltage @ 100A | 1250Vp for 20μs |
| Maximum surge current | 6,500 amps |
| Energy Rating @ 2ms | 600 Joules |
| Noise Attenuation EMI/RFI Sequencer | 10 dB @ 10 kHz, 40 dB @ 100 kHz, 100 dB @ 10 MHz(ECM-20M model only) |
| Temperature Range | 5º to 35º C |
| Humidity Range | 5% to 95% R.H. |
| Type | Power Conditioner Suppressor Module |
| Power Requirements | 120V 60Hz |
| Power Consumption | .5W |
| RoHS Compliant | Yes |
| Safety Approval | MET (UL 1449 Code) |
| Chassis Finish | Black |
| Mounting | #8 5/16" self tapping screws |
| Dimensions (H x W x D) | 3.0" (76.2 mm) x 8.5" (215.9 mm) x 3.5" (88.9 mm) |
| Shipping Weight | 1.75 lbs. (.80 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
