Skip to main content
Audio-Technica ATW-49CB Antenna Kit Combiner Two Dual Input Two 18 In. BNC-to-BNC Cable (Discontinued)
By Audio-Technica

Audio-Technica ATW-49CB Antenna Kit Combiner Two Dual Input Two 18 In. BNC-to-BNC Cable (Discontinued)

Write a Review
Part #:
ATW-49CB
Model #:
ATW-49CB
Availability: No Longer Available
Contact us for comparable solutions.
Certified Audio
Expertise
FREE Custom
System Design
Get Expert
Help Fast

Ask an Expert

Our expertly trained Sales Engineers are ready to help!

(888) 256-4112
Email

Get a Quote, Price or Support Fast!

We want to make contacting us as fast and as easy as possible. Please reach out if you have any questions or concerns about our products, system design, technical support, or orders.
Phone Monday - Friday
8:00 AM - 5:00 PM 1-888-256-4112
Email Contact us by email or
our simple form. SEND EMAIL
The Audio-Technica ATW-49CB Active Antenna Combiner Kit includes two Active Antenna Combiners designed for use with Audio-Technica 4000 and 5000 Series UHF wireless receivers and ATW-A49 LPDA antennas.

Description
The Audio-Technica ATW-49CB Active Antenna Combiner Kit includes two Active Antenna Combiners designed for use with Audio-Technica 4000 and 5000 Series UHF wireless receivers and ATW-A49 LPDA antennas. Each Active Antenna Combiner is a broadband device (frequency range from 440 to 900 MHz) that combines two incoming RF signals into one outgoing RF signal. One set of Active Antenna Combiners enables two sets of antennas to feed one wireless receiver or distribution system.

Features
  • Each kit includes:
  • Two dual-input, one-output Active Antenna Combiners
  • Two 18” BNC-to-BNC RG 58 coaxial antenna cables
  • One set of Active Antenna Combiners enables two sets of antennas to feed one wireless receiver or distribution system
  • Each Active Antenna Combiner is a broadband device that combines two incoming RF signals
  • Designed for use with Audio-Technica 4000 and 5000 Series UHF wireless receivers and ATW-A49 LPDA antennas
  • The Active Antenna Combiner provides unity gain to compensate for RF signal loss associated with combining signals
  • Also suitable for use with a variety of other receivers and antennas

Specifications
Description 2-Input Active Combiner
Bandwidth 440 MHz to 900 MHz
VSWR < 1.7:1 (within specified bandwidth)
Gain 0 dB typical (within specified bandwidth)
Impedance 50 ohms, typical(within specified bandwidth)
Termination Type 3-BNC Female
Dc Input 5-14V DC
Current 30 mA @ 12V DC
Finish On Enclosure Chemical film per MIL C 5541
Material 6063T52 extruded aluminum (sides)5052-H32 aluminum (top and bottom)
Pass-Through Current 120 mA (maximum to both inputscombined)
Weight 1 lbs (51 g)
Dimensions 2.38" (61.0 mm) W x1.83" (47.0 mm) L x0.92" (23.0 mm) H

Related Products

!
My Cart