- Description
Details
Audio-Technica's 6000 Series High Density Wireless System is designed to give users the freedom to work within an increasingly congested radio frequency spectrum. The 6000 Series operates in the 944-952 MHz band, keeping it free from broadcast TV interference. Just as important, the system uses advanced IMD suppression methods to enable its channels to be spaced at 125 kHz intervals, allowing up to 31 simultaneous channels within 4 MHz of bandwidth.
The BP893cH Omnidirectional Condenser Headworn Microphone is the same as the BP893c without the power module. 1.4 m (55") permanently attached miniature cable terminated for use with 6000 Series Wireless Transmitters. Includes AT8440 cable clip, two AT8157 windscreens, two AT8156 element covers, a moisture guard, and a carrying case.
- Features
Features
- Outstanding clarity and intelligibility
- Lightweight, ergonomic design
- Extremely unobtrusive, 1-inch flexible boom
- Secure over-the-ear placement
- Extended frequency response for natural vocal reproduction
- Available in black and beige, wired and wireless models
- Specification
Element Fixed-charge back plate, permanently polarized condenser Polar Pattern Omnidirectional Frequency Response 20 - 20,000 Hz Open Circuit Sensitivity –34 dB (19.9 mV) re 1V at 1 Pa Maximum Input Sound Level 114 dB SPL, 1 kHz at 3% T.H.D. Signal-to-Noise Ratio 68 dB, 1 kHz at 1 Pa Current Consumption 0.1 mA typical at 5V (wireless only) Voltage Range 2.5-11V (wireless only) Output Connector (Power Module) Integral 3-pin XLRM-type Audio-Technica Case Style M31 Accessories Furnished AT8440 cable clip; two AT8157 windscreens; two AT8156 element covers; moisture guard; carrying case Cable 1.4 m (55"), unterminated Dimensions Microphone: 8.1 mm (0.32") long, 2.6 mm (0.10") diameter
Boom: 26.4 mm (1.04") long, 1.07 mm (0.04") diameterWeight Microphone, boom & earpiece: 2.0 g (0.07 oz) - Reviews
Write Your Own Review










