- Description
Details
Audio-Technica's 6000 Series High Density Wireless System is designed to give users the freedom to work within an increasingly congested radio frequency spectrum. The 6000 Series operates in the 944-952 MHz band, keeping it free from broadcast TV interference. Just as important, the system uses advanced IMD suppression methods to enable its channels to be spaced at 125 kHz intervals, allowing up to 31 simultaneous channels within 4 MHz of bandwidth.
With its ergonomically molded earpiece and unobtrusive one-inch boom, Audio-Technica's BP893cH-TH MicroEarset offers inconspicuous placement along with clear, natural vocal pickup. Its lightweight low-profile design makes the microphone ideal for use in theatrical performances, houses of worship and broadcast studios.
TheBP893cH-TH MicroEarset is positioned unobtrusively over the ear. Its omnidirectional miniature condenser capsule offers outstanding pickup tailored for natural vocal reproduction, with audio reproduction similar to that of a high-quality lavalier microphone. The microphone is also ideal for use in violin pickup; wear the BP893cH-TH over the ear as usual, with no need for clamps on the violin.The BP893-TH Omnidirectional Condenser Headworn Microphone, less power module. 1.4 m (55") permanently attached miniature cable terminated for use with 6000 Series Wireless Transmitters. Includes AT8440 cable clip, two AT8157-TH windscreens, two AT8156-TH element covers, a moisture guard, and a carrying case.
- Features
Features
- Outstanding clarity and intelligibility
- Lightweight, ergonomic design
- Extremely unobtrusive, 1-inch flexible boom
- Secure over-the-ear placement
- Extended frequency response for natural vocal reproduction
- Available in black and beige, wired and wireless models
- Specification
Element Fixed-charge back plate, permanently polarized condenser Polar Pattern Omnidirectional Frequency Response 20 - 20,000 Hz Open Circuit Sensitivity –34 dB (19.9 mV) re 1V at 1 Pa Maximum Input Sound Level 114 dB SPL, 1 kHz at 3% T.H.D. Signal-to-Noise Ratio 68 dB, 1 kHz at 1 Pa Current Consumption 0.1 mA typical at 5V (wireless only) Voltage Range 2.5-11V (wireless only) Output Connector (Power Module) Integral 3-pin XLRM-type Audio-Technica Case Style M31 Accessories Furnished AT8539 power module (wired only); AT8440 cable clip; two AT8157-TH windscreens; two AT8156-TH element covers; moisture guard; belt clip (wired only); carrying case Cable 1.4 m (55"), unterminated Dimensions Microphone: 8.1 mm (0.32") long, 2.6 mm (0.10") diameter
Boom: 26.4 mm (1.04") long, 1.07 mm (0.04") diameterWeight Microphone, boom & earpiece: 2.0 g (0.07 oz) - Reviews
Write Your Own Review










