- Description
Details
Audio-Technica ES947W Cardioid Condenser Boundary Microphone
for Professional Recording and Teleconferencing ApplicationsThe new Engineered Sound, Contractor-exclusive innovations for every acoustical challenge and safe haven from RFI.
This low-profile cardioid condenser boundary microphone is recommended for unobtrusive table-, ceiling-, or panel-mount applications in high-quality sound reinforcement, professional recording and teleconferencing. Designed for permanent installation, the microphone is equipped with a self-contained power module with an XLRM-type output connector, eliminating the need for an external power module. Protected by a rugged all-metal case with a two-layer steel mesh grille, the microphone has a cardioid pattern for enhanced gain before feedback and improved signal-to-noise ratio. It is available in two colors: Black (ES947) and White (ES947W).
- Features
Features
- Designed for surface-mount applications such as high-quality sound reinforcement, professional recording and teleconferencing
- Low-profile element provides uniform cardioid polar pattern with 120º acceptance angle
- Mounts unobtrusively in table-tops, ceilings and wall panels
- Self-contained power module with XLRM-type output connector
- Rugged all-metal case with a two-layer steel mesh grille
- Isolators provide mechanical dampening of mounting-surface vibration
- Requires 11V to 52V DC phantom power
- UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Available in two colors: Black (ES947) and White (ES947W)
- RoHS compliant-free from all substances specified in the EU directive on hazardous substances
- Specification
Element Fixed-Charge Back Plate, Permanently Polarized Condenser Polar Pattern Half-Cardioid (Cardioid in Hemisphere Above Mounting Surface) Frequency Response 40 - 12,000 Hz Open Circuit Sensitivity -42 Db (7.9 mv) re 1v at 1 Pa Impedance 200 ohms Maximum Input Sound Level 142 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range (Typical) 113 dB, 1 kHz at Max SPL Signal-to-Noise Ratio 65 dB, 1 kHz at 1 Pa Phantom Power Requirements 11-52V DC, 2 mA Typical Output Connector Integral 3-Pin XLRM-Type Accessory Furnished One Pair Isolators Dimensions (Dia x L) 1.18" (30 mm) x 2.72" (69 mm) Net Weight 0.14 lbs (0.64 kg) - Documents
Documents
- Reviews
Write Your Own Review