- Description
Details
Featuring breakthrough audio and mechanical design innovations, the phantom-powered U851R offers outstanding speech intelligibility and transparent sound quality for surface-mount applications. The microphone is equipped with a PivotPoint® rotating output connector, UniSteep® filter and UniGuard® RFI-shielding technology. It accepts interchangeable condenser elements—available for boundary microphones in cardioid, hypercardioid and omnidirectional polar patterns. With a heavy die-cast case and silicon foam bottom pads to minimize coupling of surface vibration to the microphone, the U851R is equipped with self-contained electronics, eliminating the need for an external power module.
- Features
Features
- Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
- PivotPoint® rotating output connector allows cable to exit from either the rear or the bottom of the microphone
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Self-contained electronics eliminate need for external power module
- Small-diameter UniPoint® capsule near boundary eliminates phase distortion and delivers clear, high-output performance
- Heavy die-cast case and non-slip silicone foam bottom pads minimize coupling of surface vibration to the microphone
- Low-profile design with low-reflectance finish for minimum visibility
- Available in two colors: black (U851R) and white (U851RW)
- Specification
Element Fixed-charge back plate, permanently polarized condenser Polar Pattern Half-cardioid (cardioid in hemisphere above mounting surface) Frequency Response 30-20,000 Hz Low Frequency Response 80 Hz, 18 dB/octave Open Circuit Sensitivity –34 dB (19.9 mV) re 1V at 1 Pa Impedance 200 ohms Maximum Input Sound Level 134 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range (typical) 108 dB, 1 kHz at Max SPL Signal-to-Noise Ratio 68 dB, 1 kHz at 1 Pa Phantom Power Requirements 11-52V DC, 4 mA typical Switch Flat, roll-off Output Connector TB3M-type Cable 25.0' (7.6 m) long, 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F and XLRM-type connectors Dimensions (H x W x D) 4.25" (108.0 mm) x 3.31" (84.0 mm) x 0.91" (23.0 mm) Weight 9.2 oz (262 g) - Documents
Documents
- Reviews
Write Your Own Review
