The D2 dynamic instrument microphone is used for stage, studio, and broadcast applications. It is designed with a hypercardioid pickup pattern for isolation and feedback control and is equipped with a VLM™ diaphragm for natural, accurate sound reproduction.
The D2 is an excellent choice for miking instruments with a percussive nature such as rack toms, congas, saxophones, guitar cabinets, and brass. Transformerless design, low impedance, and balanced output ensure that the D2 hypercardioid instrument microphone will perform interference-free.
Designed, machined, assembled, and tested by Audix in the USA.
| Transducer Type | Dynamic |
|---|---|
| Frequency Response | 68 Hz - 18 kHz |
| Polar Pattern | Hypercardioid |
| Output Impedance | 280 Ohms |
| Sensitivity | 1.2 mV / Pa @ 1k |
| Capsule Technology | VLM Type B |
| Off Axis Rejection | >30 dB |
| Maximum SPL | ≥144 dB |
| Connector | 3-pin XLRm |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector |
| Housing / Finish | Black Hard Coat |
| Weight | 128 g (4.5 oz) |
| Length | 3.9" (100 mm) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
