Bogen Communications TPU35B 35W Telephone Paging Amplifier
The Bogen Communications TPU35B is a wall-mounted telephone paging amplifier rated at 35 watts, that can also be rack-mounted. This TPU amplifier permits paging from telephone and/or microphone; music input through an RCA jack or screw terminals; and voice-activated, variable level, music mute with fade back after page. The amp includes a night ringer which sends an electronic ringing tone signal through all speakers, alerting personnel of incoming calls. Jacks are also provided to bridge two TPU amplifiers to double the number of inputs and output power.
| Power Output | 35W RMS |
|---|---|
| Frequency Response | 70Hz to 15kHz ±1dB |
| Distortion | Less than 1% |
| Hum and Noise | (20Hz to 20kHz) MUSIC: -70dB TEL: -70dB MIC: -55dB |
| Sensitivity | MUSIC: 85mV TEL: -20dBm (77mV) MIC: 600μV |
| Tone Control | BASS: ±9dB @ 100 Hz TREBLE: ±9dB @ 10kHz |
| Regulation | 2dB |
| Inputs | TEL: 600-ohm balanced line, transformer-isolated MUSIC: Hi-Z source, RCA jacks or screw terminals MIC: Lo-Z balanced, screw terminal connection (dynamic only) MUSIC MUTE: Mutes music when shorted CONTACT RING: Sounds night ringer tone when customer-supplied dry contacts are closed TEL RING: Sounds night ringer in response to 90V ring signal BRIDGING: Permits bridging of two amplifiers |
| Outputs | 25V, 25VCT, and 70V, 16 ohms balanced or unbalanced for 35/60/100-watt models; 25V and 70V for TPU250. Provision for WMT1A line-matching transformer |
| Overload Protection | 1.0A, 120V AC circuit breaker |
| Power Requirements | (120V AC, 60 Hz) 0.75A |
| Thermal Emissions (Full Power) | 166.3 BTU/hr. |
| Dimensions (H x W x D) | 8.38" (212.85 mm) x 14.25" (361.95 mm) x 3.63" (92.2 mm) |
| Weight | 12 lbs (5.44 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
