Bosch LBB 1968/00 Plena Feedback Suppressor (Discontinued)
Usually arrives in 5-9 business days.
The Bosch LBB 1965/00 Plena Message Manager is a high performance, highly versatile stand-alone digital message player. Applications range from spot announcements in supermarkets and theme parks to warning and evacuation messages in emergency situations.
The Plena message manager is a high performance, highly versatile stand-alone digital message player. Applications range from spot announcements in supermarkets and theme parks to warning and evacuation messages in emergency situations.
With the LBB1965/00 up to 12 messages can be stored in the internal 64Mbit EEPROM, without the need for data retention battery backup. Each message can have any length within the total available capacity. Messages and configurations are uploaded from a PC via RS-232 into the memory, after which the unit operates without PC connection. The standard WAV-format is used for the messages, and sample rates of 8 kHz up to 24 kHz with 16-bit word length (linear PCM) are supported. This gives up to 500 s of recording time with CD-quality signal-to-noise ratio. The use of linear PCM instead of some sort of compressed audio format (like MP3, ADPCM and u-law/Alaw) ensures high-quality playback of all types of audio signals, including sound effects and special tones, such as attention chimes.
The unit has 12 contact closure trigger inputs for announcements. Each can be configured for a sequence of up to 4 messages out of the available ones. In this way some messages may be used in different combinations with other messages, optimizing flexibility and used storage space. The LBB 1965/00 can also play emergency/evacuation messages, as it fulfills the IEC 60849 standard.
| Voltage | 230 VAC/115 VAC, ±10%, 50/60 Hz |
|---|---|
| Max Power Consumption | 50 VA |
| Max Mains Inrush Current | 1.5 A @ 230 VAC / 3 A @ 115 VAC |
| Battery Voltage | 24 VDC, +20% / -10% |
| Max Battery Current | 1A |
| Data Format | WAV-file, 16-bit PCM, mono |
| Supported Sample Rates (fs) | 24 kHz, 22.05 kHz, 16 kHz, 12 kHz, 11.025 kHz, 8 kHz |
| @ fs=24kHz | 100 Hz – 11 kHz (+1/-3 dB) |
| @ fs=22.05kHz | 100 Hz – 10 kHz (+1/-3 dB ) |
| @ fs=16kHz | 100 Hz – 7.3 kHz (+1/-3 dB ) |
| @ fs=12kHz | 100 Hz – 5.5 kHz (+1/-3 dB) |
| @ fs=11.025kHz | 100 Hz – 5 kHz (+1/-3 dB) |
| @ fs=8kHz | 100 Hz – 3.6 kHz (+1/-3 dB) |
| Distortion | |
| S/N (flat at max volume) | >80 dB |
| Memory Capacity | 64 Mbit EEPROM |
| Recording/Playback Time | 500 s @ fs=8 kHz …167 s @ fs=24 kHz |
| Number of Messages | Max. 12 |
| Supervision EEPROM | Continuous checksum control |
| Supervision DAC | 1 Hz pilot tone |
| Data Retention Time | >10 years |
| Loop-through audio input 1 | (3-pin XLR, balanced) |
| Sensitivity | 1 V |
| Impedance | 20 kOhm |
| CMRR | >25 dB (50Hz-20kHz) |
| Loop-through audio input 2 | (Cinch, unbalanced) |
| Sensitivity | 1 V |
| Impedance | 20 kOhm |
| Supervision Pilot Tone | 20 kHz, ±10%, level adjustable |
| Line Output 1 (3-pin XLR, balanced) | Nominal Level: 1 V, adjustable, Impedance: |
| Line Output 2 (Cinch, unbalanced) | Nominal Level: 1 V, adjustable, Impedance: |
| Trigger inputs (Screw) Activation, Supervision, Supervision Method | Contact closure, On trigger inputs 1-6, selectable, Cable loop resistance check |
| Control Outputs (Screw) | Message Active Relay: 100 V, 2 A (voltage free, SPDT), Fault Relay: 100 V, 2 A (voltage free, SPDT) |
| RS232 (9-pin D-sub) PC to LBB1965/00, LBB 1965/00 - LBB 1925/10 | 115 kb/s, N, 8, 1, 0 (upload), 19.2 kb/s, N, 8, 1, 0 (zone control) |
| Operating Temperature | -10°C to +55ºC |
| Storage Temperature | -40°C to +70ºC |
| Relative Humidity | |
| Dimensions (H x W x D) | 2.2" (45 mm) x 16.92" (430 mm) x 10.63" (270 mm) |
| Weight | 6.61 lbs (3 kg) |
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.