Ashly Audio
Ashly Audio Amplifiers, Processors and Mixers
We offer a wide variety of Ashly Audio amplifiers, mixers, speakers, signal processors, and power amplification solutions for use in commercial sound and public address systems. We carry multi-channel, multi-zone capable power amplifiers, networking amplifiers, and signal processing products that can be configured with Dante™ enabled audio systems.
Featuring:
Ashly digiMix™ digital mixers pack an astonishing feature set into a compact space. You get features that other mixers in this price range simply cannot include, such as 6 DCA groups, the genuine Alps motorized fader, and an ingenious EZ-Mode for the non-technical user with no audio mixing experience.
Ashly Audio nX Multi-Mode Amplifiers feature energy-efficient Class-D switching amplifier technology combined with a switch-mode power supply. All feature Selectable Outputs on each channel so you can connect to virtually any speaker: low impedance (2, 4, and 8-ohm), or constant voltage (70V or 100V). Offered in 2- and 4 Channels, nX is available in two and four-channel models with 3000, 1500, 800, 400, 150, and 75 Watts per channel.
Ashly Pêma is a matrix mixer with a full 8-in x 8-out matrix mixer, (any input can be assigned to any output or outputs). Pêma is a digital signal processor with the full Protēa™ suite of DSP settings. Then we added gain-sharing automatic microphone mixing, an automatic feedback suppressor, ambient noise detection and adjustment, and a real-time clock with an event scheduler. Pêma features Ashly’s energy efficient Class-D amplifier topology with a switching power supply—and is over 80% energy efficient out of the box.
Ashly TRA Series Amplifiers employ our advanced, efficient amplifiers perfect for Low Impedance, 25V, 70V or 100V installations with modest power requirements. They also feature a switch-mode power supply with Class-D circuitry, providing an extremely power-efficient solution. All TRA Series amplifiers are convection-cooled, so there’s little maintenance after the installation and no annoying fan noise.
Ashly KLR Series high-efficiency, high-power amplifiers are the ideal choice for high-output speaker systems, line arrays, dual 18” subwoofers, and much more. If you think you need to use an expensive, European amplifier to get a clean, stable, quiet amplifier—think again. KLRs are quiet, with signal-to-noise ratio ratings from >108 dB to >110 dB across all models. Each with a 3-position gain switch for both channels, a 3-position mode switch (bridged, stereo, or parallel mono), and a 3-position 12dB/oct HPF switch (30Hz, 50Hz or off).
Need help with your new sound system design or need technical advice on your amplifier purchase? At Pro Acoustics, get support fast on Ashly amplifiers.
We offer contractor, integrator, educational, government, and military discounts.
Want to Learn More about Ashly Amplifiers or Get a Price Quote Fast?
For more information, contact our sales engineers at (888) 256-4112 or fill out the "Talk To An Audio Engineer" form to the left, and one of our team members will contact you shortly and help you select and purchase an Ashly amplifier solution.
Talk To An Audio Engineer
Choosing Ashly Audio Amplifiers
Most people feel overwhelmed when choosing Ashly Audio amplifiers, signal processors, and power amplification solutions for use in commercial sound and public address systems. Don’t worry. With over 100 years of collective audio design experience, we’ve got you covered. Ashly amps are made to run 24/7 365 days a year and last in any challenging environment.
1. Select Ashly Audio Amplifier Solution
Choose the Ashly multi-channel and multi-zone capable power amplifier, networking amplifier, or DSP matrix signal processing product from the list below that you feel will best meet your commercial audio 25V, 70V and 100 volt distributed audio, background music, paging, or public address sound system needs. Don’t worry, this is just a starting point.
2. Customize with a Sales Engineer
One of our Sales Engineers will guide you in finalizing a product selection that is tailored to your application and budget.
3. Purchase the Right Product for You
Feel confident knowing that the equipment you have purchased is designed by a qualified audio engineer and will work - exactly the way you need it.
Shop with Confidence
Our committed, experienced professional sales engineers deliver reliable designs and provide lifetime tech support for all products.
-
Ashly Audio KLR-2000 2-Channel High Performance Power Amplifier 2 x 350W @ 8 Ohms
The Ashly KLR-2000 Power Amplifier has been optimized to provide reliable audio performance with sonic perfection. Covering a power range from 1000-2500 Watts per channel at 2 Ohms the KLR-2000 is perfectly suited for a wide range of sound reinforcement.
-
Ashly Audio KLR 3200 2-Channel High Performance Power Amplifier 2 x 650W @ 8 Ohms
The Ashly KLR 3200 high-performance power amplifier is optimized to provide reliable audio performance with sonic perfection. Covering a power range from 1000 to 2500 Watts per channel at 2 ohms the KLR 3200 is perfectly suited for a wide range of sound reinforcement.
-
Ashly Audio Pema 4125 4-Channel Power Amplifier 4 x 125W @ 4 ohms with Protea DSP
The Ashly Pema 4125 DSP processor features a new sleek look, 4-channel at 125 watts per channel at 4Ω. The Pema is a matrix mixer with 8-in x 8-out, where any input can be assigned to any output or outputs.
-
Ashly Audio Pema 4250 4-Channel Power Amplifier 4 x 250W @ 4 ohms with Protea DSP
The Ashly Pema 4250 DSP Processor is a Protea-Equipped Media Amplifier—either 4-channel at 250 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out matrix mixer, where any input can be assigned to any output or outputs. Pema is a digital signal processor.
-
Ashly Audio Pema 8125 8-Channel Power Amplifier 8 x 250W @ 4 ohms with Protea DSP
The Ashly Pema 8125 DSP Processor with it's new sleek look, is a Protea-Equipped Media Amplifier is an 8-channel at 250 Watts or 125 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out matrix mixer, where any input can be assigned to any output or outputs.
-
Ashly Audio Pema 8250 8 Channel Power Amplifier 8 x 250W @ 4 ohms with Protea DSP
The Ashly Pema 8250 DSP Processor is a Protea-Equipped Media Amplifier. It features 8-channesl at 250 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out matrix mixer, where any input can be assigned to any output or outputs.
-
Ashly Audio TM-335 Public Address Mixer Amplifier 3-Input 35W
The Ashly TM-335 is a mixer and 35W mono power amplifier for applications that require public address, background music and/or paging.
List $349.00Price $299.00Savings $50.00 (14%) -
Ashly Audio AW5.2T+ 5" Passive Full-Range All Weather Speaker with Transformer - Pair
The Ashly Audio AW5.2T+ 5" passive full range all weather speakers are perfect for indoors and outdoors. Their sleek ovoid shape allows them to fit unobtrusively into any hospitality decor. -
Ashly Audio AW8.2T+ 8" 70V Passive All Weather Speakers - Pair (B-Stock)
The Ashly Audio AW8.2T+ 8" passive full range all weather speakers are perfect for indoors and outdoors. Their sleek ovoid shape allows them to fit unobtrusively into any hospitality decor.Free Shipping!List $599.00Regular Price: $499.00
Pro Acoustics Price $402.99
Savings $196.01 (33%) -
Ashly Audio TM-360 3-Input 60W Compact Public Address Mixer Amplifier
The Ashly TM-360 is a 3-input, 60 watt unit that offers input and output flexibility coupled with energy efficiency. It uses a Class-D amplifier topology for added energy efficiency.
List $549.00Price $449.00Savings $100.00 (18%) -
Ashly Audio AW8.2T+ 8" Passive Full-Range All Weather Speaker with Transformer - Pair
The Ashly Audio AW8.2T+ 8" passive full range all weather speakers are perfect for indoors and outdoors. Their sleek ovoid shape allows them to fit unobtrusively into any hospitality decor. -
Ashly Audio SRA-2075 1U Power Amplifier
The Ashly SRA-2075 power amplifier is an advanced, efficient amplifier that is perfect for installations with modest power requirements. Housed in a compact single rack space chassis and weighing only 10 lbs, and designed to drive 4 or 8 ohm loads.
-
Ashly Audio SRA-2150 1U Rackmount Stereo Power Amplifier 2 Channels 150W/Channel @ 4 ohms
The Ashly Audio SRA-2150 1U power amplifier is an advanced, efficient amplifier that is perfect for installations with modest power requirements. Housed in a compact single rack space chassis and weighing only 10 lbs, and designed to drive 4 or 8 ohm loads. With remote power turn-on/off and adjustable turn-on delay up to eight seconds.
-
Ashly Audio TRA-2075 2-Channel Mutli-Mode Power Amplifier 2 x 75W @ 4 Ohms
The TRA-2075 power amplifier is an advanced, efficient 2-channel amplifier featuring 75W at 4 ohm. Perfect for Low Impedance, 70V or 100V installations with modest power requirements, they also feature a switch-mode power supply with Class-D circuitry, providing an extremely power-efficient solution.
-
Ashly Audio SRA-4150 4 Channel Power Amplifier
Ashly’s SRA-Series makes it a snap to get exactly what you need. The SRA-Series utilizes state of the art technology to create advanced, efficient amplifiers perfect for installations.
-
Ashly Audio TRA-2150 2-Channel Mutli-Mode Power Amplifier 2 x 150W @ 4 Ohms
The TRA-2150 power amplifier is an advanced, efficient 2-channel amplifier featuring 150W at 4 ohm Perfect for Low Impedance, 25V, 70V or 100V installations with modest power requirements, they also feature a switch-mode power supply with Class-D circuitry, providing an extremely power-efficient solution.
-
Ashly Audio 3.6SP Protea DSP 3x6 System Processor
The 3.6SP (3-in x 6-out) is a great choice for both live sound and use in fixed installations like worship facilities, schools and performance spaces. Use the full Protea™ DSP Suite—crossover, equalization, compressor/limiter and delay—with up to 682ms on the input and the output, SPs serve as a front-end processor for delay stacks.
-
Ashly Audio nX 752 2-Channel Multi-Mode Power Amplifier
The Ashly nX 752 Multi-Mode Power Amplifier is designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.
-
Ashly Audio TRA-4075 4-Channel Power Amplifier
The Ashly TRA-4075 power amplifier is a 4-channel 2 rack space amplifier that is perfect for low impedance, 25V, 70V or 100V installations with modest power requirements. All TRA Series amplifiers are convection-cooled, so there’s little maintenance after the installation, and no annoying fan noise.
-
Ashly Audio CA-1.52 2x1500W at 4 Ohm Power Amplifier (Open Box)
Free Shipping!The Ashly CA-1.52 amp is designed to excel in performance installations, such as theaters, school auditoriums and Houses of Worship. However, with 70 and 100V direct-drive capability and more integration-friendly features than you'd typically find on many amplifiers, they are also right at home in commercial installations. Push them hard. They can take it.
List $1,999.00Regular Price: $1,599.00
Pro Acoustics Price $1,367.99
Savings $631.01 (32%) -
Ashly Audio 4.8SP Protea DSP 4x8 System Processor
The Ashly 4.8SP DSP Loudspeaker System Processor is a three input/six output digital signal processor capable of precise control of a broad range of audio functions. The front panel interface allows quick access to all control parameters by offering dedicated function buttons, eliminating the need for hidden sub-menus.
-
Ashly Audio CA-502 2-Channel 2 x 500W at 4 Ohm Power Amplifier
The Ashly CA-502 amp is designed to excel in performance installations, such as theaters, school auditoriums and Houses of Worship. However, with 70 and 100V direct-drive capability and more integration-friendly features than you'd typically find on many amplifiers, they are also right at home in commercial installations. Push them hard. They can take it.
-
Ashly Audio TRA-4150 4-Channel Power Amplifier
The Ashly TRA-4150 power amplifier is a 4-channel 2 rack space amplifier that is perfect for low impedance, 25V, 70V or 100V installations with modest power requirements. All TRA Series amplifiers are convection-cooled, so there’s little maintenance after the installation, and no annoying fan noise.
-
Ashly Audio nX 1502 2-Channel Multi-Mode Power Amplifier
The Ashly nX 1502 Multi-Mode Power Amplifier is designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.
Ashly Audio Amplifiers, Processors and Mixers
We offer a wide variety of Ashly Audio amplifiers, mixers, speakers, signal processors, and power amplification solutions for use in commercial sound and public address systems. We carry multi-channel, multi-zone capable power amplifiers, networking amplifiers, and signal processing products that can be configured with Dante™ enabled audio systems.
Featuring:
Ashly digiMix™ digital mixers pack an astonishing feature set into a compact space. You get features that other mixers in this price range simply cannot include, such as 6 DCA groups, the genuine Alps motorized fader, and an ingenious EZ-Mode for the non-technical user with no audio mixing experience.
Ashly Audio nX Multi-Mode Amplifiers feature energy-efficient Class-D switching amplifier technology combined with a switch-mode power supply. All feature Selectable Outputs on each channel so you can connect to virtually any speaker: low impedance (2, 4, and 8-ohm), or constant voltage (70V or 100V). Offered in 2- and 4 Channels, nX is available in two and four-channel models with 3000, 1500, 800, 400, 150, and 75 Watts per channel.
Ashly Pêma is a matrix mixer with a full 8-in x 8-out matrix mixer, (any input can be assigned to any output or outputs). Pêma is a digital signal processor with the full Protēa™ suite of DSP settings. Then we added gain-sharing automatic microphone mixing, an automatic feedback suppressor, ambient noise detection and adjustment, and a real-time clock with an event scheduler. Pêma features Ashly’s energy efficient Class-D amplifier topology with a switching power supply—and is over 80% energy efficient out of the box.
Ashly TRA Series Amplifiers employ our advanced, efficient amplifiers perfect for Low Impedance, 25V, 70V or 100V installations with modest power requirements. They also feature a switch-mode power supply with Class-D circuitry, providing an extremely power-efficient solution. All TRA Series amplifiers are convection-cooled, so there’s little maintenance after the installation and no annoying fan noise.
Ashly KLR Series high-efficiency, high-power amplifiers are the ideal choice for high-output speaker systems, line arrays, dual 18” subwoofers, and much more. If you think you need to use an expensive, European amplifier to get a clean, stable, quiet amplifier—think again. KLRs are quiet, with signal-to-noise ratio ratings from >108 dB to >110 dB across all models. Each with a 3-position gain switch for both channels, a 3-position mode switch (bridged, stereo, or parallel mono), and a 3-position 12dB/oct HPF switch (30Hz, 50Hz or off).
Need help with your new sound system design or need technical advice on your amplifier purchase? At Pro Acoustics, get support fast on Ashly amplifiers.
We offer contractor, integrator, educational, government, and military discounts.
Want to Learn More about Ashly Amplifiers or Get a Price Quote Fast?
For more information, contact our sales engineers at (888) 256-4112 or fill out the "Talk To An Audio Engineer" form to the left, and one of our team members will contact you shortly and help you select and purchase an Ashly amplifier solution.