- Description
Details
AtlasIED IP-SDH POE+ Indoor Wall Mount IP Horn Speaker with LCD Display
The AtlasIED IPX Series IP-SDH indoor wall mount IP speaker with horn and display leverage the VoIP Communication solution to extend telepresence with enhanced audio for those environments where network-wide communication is desired and that require large speakers with high output to overcome high ambient noise areas or large spaces.
AtlasIED IP-SDH registers as a communication endpoint directly within InformaCast, and Revolution Advanced Notification applications, supporting both visual text and audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded, & scheduled announcements, while leveraging the WAN/LAN Network Architecture.
When used within a Cisco Environment, these same IP speakers from AtlasIED can join Cisco's Unified Survivable Remote Site Telephony (SRST) as a supported device within SRST endpoint Architecture. Cisco's SRST provides remote location call-processing redundancy when access to the centralized Cisco Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination of phones and speakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).
IP-SDH IP speakers with display provide equality "effective communication." What does it mean for communication to be "effective?" Simply put, "effective communication" means that whatever is written or spoken must be as clear and understandable to people with disabilities as it is for people who do not have disabilities.
Where 3rd party notification applications are not required, the IP-SDH speakers can register as SIP devices directly to a SIP server or VoIP Communications Manager for critical alerts /public address applications.
- Features
Features
- Natively auto registers as an endpoint in GlobalControlKom®, InformaCast®, or revolution notification applications
- Works with new or existing multicast enabled local area networks
- Compatible with SIP (Session Initiation Protocol) VoIP systems
- IEEE 802.3af or 802.3at compliant POE/POE+
- Primary and aux speaker outputs
- Emergency alert trigger
- Relay output
- Aux audio input
- External power supply option
- Dynamic or static IP address
- Phone/night loud ringer
- Static multicast audio reception
- Custom event notification scripting
- Auto provisioning
- Secure web configuration
- Highly efficient APF horn loudspeaker provides greater output and coverage
- Includes LED display with capability to display time or scrolling text for announcements or emergency messages
- Specification
System Type PoE+ Indoor IP Endpoint Horn Speaker with LCD Operation Mode Self Powered Indicators Network Status (On Back) Operating Range (-10db) 600Hz - 14kHz Frequency Response (+/- 5dB) 600 - 14,000 Hz (Nominal) Vertical Coverage 95° (-6dB, 2000 Hz Octave Band) Horizontal Coverage 95° (-6dB, 2000 Hz Octave Band) Max SPL at 1m (Passive) 120dB at 15 Watts (Peak) General Purpose Interface Two Trigger Inputs
One Relay Output (2A @ 30 VDC)Transducers Transducer Qty and Size 3.8" Voice Coil Size 1.25" Cone Material Double Entrant Compression Driver Amplification Type Single-Channel Class D Topology with Primary and Secondary Outputs AC Power Input PoE or PoE+ and External 24VDC Power Rating (RMS) 12W Max (802.3AF)
25W Max (802.3AT)THD <0.2% Cooling Passive / Convection Driver Protection Built-In Limiter Audio Inputs and Outputs Input: Analog Audio Type(s) One Balanced Line Level Input: Analog Connectivity Secured Screw Terminal Block Input: Network Audio Type(s) G.711 U-Law / A-Law and G.722 Capable Input: Network Connectivity RJ-45 Female Output: Analog Audio Type(s) One Balanced Line Level Output: Analog Connectivity Secured Screw Terminal Block Output: Digital Audio Type(s) G.711 U-Law / A-Law and G.722 Capable (Multicast) Output: Speaker Level 8Ω, 12W (802.3AF), 25W (802.3AT) Output: Speaker Connectivity Primary and Slave Secured Screw Terminal Block Display Display Type High Resolution Back-Lit Color Liquid Crystal Display Display Color Range Backlit Display - Red, Blue, Green - (With GCK)
Standard - Blue
Text - WhiteLCD Display Scrolling Text Character Count - 160 Surface Luminance 1900 cd/m^2 Minimum, All White Pixels Character Max Height 480 Pixels Viewable Dimensions (H x W) 8.66" (221 mm) x 2.23" (57 mm) Control Time via NTP - Text Controlled via Software Network Ethernet IEEE 802.3 10/100Base-T PoE IEEE 802.3 AF/AT Compliant VLAN IEEE 802.1q Tagging Protocols IP Addressing DHCP / Static Auto-Provisioning HTTP / TFTP Auto-Registration HTTP / Service Location Protocol / IEDNet Time NTP Telephony SIP Enclosure Color White Grille Material Powder Coated Steel Baffle Material Plastic Mounting / Rigging Provisions 4 x Screws Safety Agency Ratings ETL Listed to Comply with 62368-1, CSA C22.2 #62368-1, IEC 62368-1 CB Scheme and FCC Logo One Color Print Product Dimensions (H x W x D) 14.37" (365 mm) x 12.87" (327 mm) x 4.18" (106 mm) Shipping Weight 6.67 lbs (3.02 kg) - Documents
- Reviews
Write Your Own Review