- Description
Details
The Bose MB12 WR low-frequency loudspeakers are designed to provide bass augmentation for Bose LT arrays and other subwoofer applications. The compact 1 x 12" (305 mm) configuration allows minimal-height arrays when used with LT mid/high loudspeakers. Bose Modeler ® tools and optional rigging hardware make directional bass arrays easy to design and install using MB12 loudspeakers.
The enclosure is constructed of void-free, exterior grade Baltic birch plywood with extensive internal bracing. The enclosure interior has been treated with wood sealer and the exterior finished with a two-part spray polyurethane coating to resist weather elements and scuffing. The enclosure is covered by a 16-gauge perforated stainless steel grille with powder-coated finish and backed with an open-cell foam. The loudspeaker can survive water incursion consistent with the IEC 529 IPX5 rating. The enclosure has sixteen (16) stainless steel threaded inserts (4 each: top, bottom, sides) that accept standard SAE 3/8"-16 rigging hardware.
Applications:
- Stadiums
- Arenas
- Houses of worship
- Auditoriums
- Performing arts venues
- Outdoor event venues
MB12 WR for indoor and outdoor applications
- Features
Features
- Low-frequency reinforcement for Bose® LT arrays and other subwoofer applications that require 40 - 280 Hz bass response
- Front-loaded tapered transmission line design provides peak-free extended low-frequency response, and reduces port turbulence distortion
- 1 x 12" (305 mm) high-excursion woofer with 4" (102 mm) voice-coil and 400 W long-term power rating provides high SPL with fast transient response
- Compact enclosure optimized for bass-array applications when cardioid or other directional-bass configurations are required for reverberant spaces
- Specification
Frequency Response 40 Hz - 280 Hz (+/-3 dB) Frequency Range 36 Hz - 290 Hz (-10 dB) Nominal Dispersion Omni-directional below 200 Hz Sensitivity 91 dB SPL (SPL / 1 W @ 1 m) Maximum SPL @ 1 m 117 dB SPL (123 dB SPL peak) Crossover Frequency None (external DSP crossover required) Recommended High-Pass Filter 30 Hz (24 dB / octave) Loudspeaker EQ Required Long-Term Power Handling 400W (1600W peak) Nominal Impedance 8 Ω Transducers LF: 12" (305 mm) woofer with 4" (102 mm) voice-coil Enclosure Exterior grade Baltic birch plywood, 13-ply, 18 mm Finish Two part spray polyurethane coating, black Grille 16-gauge perforated stainless steel grille with powder-coated finish and backed with an open-cell foam Environmental Outdoor per IEC 529 IPX5 Connectors (2) parallel-wired NL4 Neutrik® Speakon® connectors Suspension/Mounting Sixteen (16) points SAE 3/8" - 16 threaded inserts (4 each, top, bottom and sides), stainless stee Dimensions (H x W x D) 14.7" (374 mm) x 20" (508 mm) x 25.4" (646 mm) Net Weight 78 lbs (35.4 kg) Shipping Weight 92 lbs (41.6 kg) - Documents
Documents
- Reviews
Write Your Own Review