- Description
Details
The Control 42C is an ultra-compact in-ceiling professional satellite loudspeaker designed for use with the Control 40CS/T subwoofer. When combined with the Control 40CS/T, the Control 42C offers an extremely natural sounding and powerful subwoofer-satellite system that is perfect for applications requiring wide bandwidth and superior sonic performance with minimal visual impact.
The integrated backcan on the Control 42C combined with the C-ring support backing plate allows for a quick and easy installation of the unit. The system’s 60 mm (2.5 in) mid-high driver features a polypropylene cone and pure butyl-rubber surround for long life. The copper-clad aluminum voice coil wound on a vented aluminum former offers low distortion.
The 16-ohm impedance allows paralleling up to 4 speakers on a 4-ohm capable amplifier.
The Control 42C must be operated with either an active high-pass filter or a passive crossover, such as the one built into the Control 40CS/T subwoofer, to protect it against damage from low frequencies.
Because of the very light weight of Control 42C, tile rails may not be required for many in-ceiling applications. They are not packaged with this model, however MTC-RAIL tile rail sets are available separately.
Housed in a compact package, the lightweight Control 42C features an elegant, unobtrusive design and is ideal for both small and large projects alike.- Features
Features
- Small, Unobtrusive Size
- High-Fidelity Sound for Subwoofer-Satellite Systems
- Very broad 160° coverage pattern
- 60 mm (2.5 in) mid-high driver with butyl rubber surround
- 16-ohm driver, allows paralleling of multiple units on a low-Z amplifier
- Integrated backcan for easy "blind-mount" install. Packaged with grille and C-ring support backing plate for easy installation
- Elegant industrial design fits any décor
- Specification
Transducer (Driver) 60 mm with polypropylene cone, butyl rubber surround, copper-clad coil, vented aluminum former Frequency Range (-10 dB) 140 Hz - 20 kHz Frequency Response (± 3 dB) 180 Hz - 17 kHz Power Capacity 30 Watts Continuous Program Power 15 Watts Continuous Pink Noise Nominal Sensitivity (2.83V/1m) 82 dB Nominal Coverage Angle 160° conical coverage Directivity Factor (Q) 6.6 Directivity Index (DI) 6.8 dB Rated Maximum SPL 94 dB @ 1 m (3.3 ft) average, 114 dB peak Rated Impedance 16 ohms Input Connectors Two removeable locking 2-pin connectors with screw down terminals. Max wire 12 AWG (2.5 mm) Knockouts Two (top and side) Ceiling Thickness Range Accommodates tiles/drywall up to 27 mm (1.1 inches) thick Cutout Size 4.1" (104 mm) Diameter Dimensions (Dia x D) 5" (127 mm) x 4.2" (94 mm) from back of baffle Weight 1.6 lbs (0.7 kg) - In The Box
In The Box
- C-ring support backing plate
- Knockout strain relief
- Cutout template
- Paint shield
- Reviews
Write Your Own Review