- Description
Details
The TOA F-2852 is a 2-way, flush-mounted ceiling speaker that offers a wide frequency range and high-quality sound output. Use of its supplied and optional mounting hardware permits versatile mounting to match a wide range of applications and installation locations.
Its two-way, bass-reflex speaker system designed to provide a wide frequency range and high power handling capability. It is ideal for locations that have high ceilings or require true-to-life sounds. The uniform sound output levels are achievable not only in the position directly under the speaker, but also over a wide radius. (Coverage angle is approximately 110°.) Because the speaker is provided with both low- and high-impedance operating capability, it can be used in many different applications. Front panel-mounted input selector switch permits easy verification and change of current impedance settings, even after installation. It can be quickly and accurately mounted to ceilings and walls. The rotating front grille can be installed quickly and conveniently. It has an attractive exterior design specially created by an interior designer blends naturally with any architectural space, enhancing the immediate area's sense of harmony. Optional mounting hardware permits installation in weak ceiling panels.
F-122CU2, F-2322CU2, F-2352CU2 and F-2852CU2 are now packaged as two speakers and two tile bridges, all in one box. The new tile bridges allow simpler and faster installation, ordering convenience and lower shipping costs. Existing TOA mounting C-rings and trim rings will continue to be available for installations that do not require tile bridges.- Features
Features
- Ideal for high ceiling applications
- Special diffuser provides wide off-axis high frequency response
- Ported bass-reflex design
- Co-axial: 6.5” cone driver and dome tweeter
- Wide-dispersion: 120º conical (1-4k Hz avg)
- Frequency Response: 60 to 20k Hz
- Sensitivity: 91 dB SPL (1 W, 1 m)
- Continuous Power Handling: 180 W (8 ohms)
- Built-in 25/70.7/100 V transformer (30 W max) with 8/16 ohm modes
- Convenient power tap selector on front baffle
- Metal back-can and safety cable
- Removable terminal block with loop-through terminations
- Low-profile, paintable grille
- Overload protection circuitry
- Tile bridge included (F-2852CU2 ONLY)
- Specification
Enclosure Bass reflex type Rated Input 60 W (High Impedance) Power Handling Capacity Continuous pink noise: 90 W (8 Ω), 60 W (16 Ω) Impedance 70 V line 83 Ω (60 W), 170 Ω (30 W), 330 Ω (15 W), 670 Ω (7.5 W), 3.3 kΩ (1.5 W) 25 V line 83 Ω (7.5 W), 170 Ω (3.7 W), 330 Ω (1.9 W), 670 Ω (0.9 W), 3.3 kΩ (0.2 W) Frequency Response 60 – 20,000 Hz Sound Pressure Level 91 dB (1 W, 1 m) Speaker Component High frequency: Dome-type, Low frequency: 16 cm (6 1/2") cone-type UL Cord UL1480 (UEAY), UL2043, CAN/CSA C22.2 No.205 (UEAY7) Mounting Hole ø250 mm (9 27/32") Maximum ceiling thickness: 37 mm (1 29/64") Input Terminal Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals) Usable Cable Solid copper wire: ø1.0 – ø1.6 mm (equivalent to AWG 18 – 14)
Stranded copper wire: 0.75 – 2.5 mm2 (equivalent to AWG 18 – 14)Finish Enclosure Steel plate, plating Baffle Fire-resistant ABS resin (resin material grade: UL-94 V-0 orits equivalent), black Rim Fire-resistant ABS resin (resin material grade: UL-94 V-0 orits equivalent), white, paint Punched net Steel plate, white, paint Dimensions ø280 mm (11 1/32") x Depth 236 mm (9 2/8") Weight 11.3 lbs (including mounting accessories) Shipping Weight - Pair 22.6 lbs (including mounting accessories) - Reviews
Write Your Own Review