- Description
Details
Atlas Sound IP-SDM POE+ Wall Mount Indoor IP Speaker
with LCD Display and Talkback Microphone
AtlasIED IPX Series IP-SDM indoor wall mount IP speaker with an LCD display and talkback leverage the VoIP Communication solution to extend telepresence with enhanced audio for those environments where network-wide communication is desired and that require large speakers with high output to overcome high ambient noise areas or large spaces.
AtlasIED IP-SDM registers as a communication endpoint directly within InformaCast, and Revolution Advanced Notification applications, supporting both visual text and audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded, scheduled announcements & intercom, while leveraging the WAN/LAN Network Architecture.
When used within a Cisco Environment, these same IP speakers from AtlasIED can join Cisco’s Unified Survivable Remote Site Telephony (SRST) as a supported device within SRST endpoint Architecture. Cisco’s SRST provides remote location call-processing redundancy when access to the centralized Cisco Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination of phones and speakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).
Atlas IP speakers with display and talkback provide equality "effective communication." What does it mean for communication to be "effective?" Simply put, "effective communication" means that whatever is written or spoken must be as clear and understandable to people with disabilities as it is for people who do not have disabilities.
Where 3rd party notification applications are not required, the speakers can register as SIP devices directly to a SIP server or VoIP Communications Manager for critical alerts /public address applications and two-way communication.
- Features
Features
Network Features:
- Dynamic or static IP address
- IEEE802.3 10/100Base-T ethernet
- IEEE 802.1q tagging
- IEEE 802.11AT compliant
- VoIP etandard audio: G.711 u-law/a-law (64 kbit/s) or G.722 wideband audio (64 kbit/s)
- Auto provisioning: DHCP option 66, 150, or TFTP server or DHCP option 72 for HTTP server
- Auto registration: SLP for InformaCast or DHCP option 72 for Revolution or GCK
- Static configuration: HTTP GUI for static configuration or Cisco SRST
Audio Features:- Integrated amplifier 15w total power: primary speaker output 8 ohm
- Aux audio lne-in unbalanced (2.8Vpp 10K)
- Aux audio line-out unbalanced (2.8Vpp 10K)
Additional Features:- 2 general purpose inputs
- 1 general purpose output (2A @ 30 VDC)
- Phone/night loud ringer
- External power supply option
- Specification
System Type PoE+ Indoor IP Speaker System with LCD Display and Microphone Indicators Network Status (On Back) Frequency Response (+/- 5dB) 86Hz - 15.5kHz Vertical Coverage 105° (2kHz Octave Band, -6dB Points) Horizontal Coverage 105° (2kHz Octave Band, -6dB Points) Directivity Factor (Q) 17 @ 2 kHz Max SPL at 1m (Passive) 110dB SPL Continuous General Purpose Interface Two Trigger Inputs
One Relay Output (2A @ 30 VDC)Transducers LF Transducer Qty and Size (1) 8" (203 mm) HF Transducer Qty and Size (1) 3" (76 mm) HF Crossover Frequency 2,800Hz, First Order Voice Coil Size 1" (25 mm) Cone Material Curvelinear, Treated Industrial Paper Sensitivity 98dB SPL Average Amplification Type Single-Channel Class D Topology with Primary and Secondary Outputs AC Power Input PoE or PoE+ and External 24VDC Power Rating (RMS) 12W Max (802.3AF)
25W Max (802.3AT)THD <0.2% Cooling Passive / Convection Driver Protection Built-In Limiter Microphone Sensitivity Minus 35 (±4dB)
(0db = 1V/pa, 1kHz)Impedance Less than 2.2kΩ Directivity Omnidirectional Frequency Range 20Hz - 20kHz Standard Operation Voltage 2V Max. Operation Voltage 10V Current Consumption Max. 0.5 mA Sensitivity Reduction Within Minus 3dB @ 1.5V S/N Ratio More than 62dB Audio Inputs and Outputs Input: Analog Audio Type(s) One Balanced Line Level Input: Analog Connectivity Secured Screw Terminal Block Input: Network Audio Type(s) G.711 U-Law / A-Law and G.722 Capable Input: Network Connectivity RJ-45 female Output: Analog Audio Type(s) One Balanced Line Level Output: Analog Connectivity Secured Screw Terminal Block Output: Digital Audio Type(s) G.711 U-Law / A-Law and G.722 Capable (Multicast) Output: Speaker Level 8Ω, 12W (802.3AF), 25W (802.3AT) Output: Speaker Connectivity Primary and Slave Secured Screw Terminal Block Display Display Type High Resolution Back-Lit Color LCD Display Display Color Range Backlit Display - Red, Blue, Green - (With GCK)
Standard - Blue
Text - WhiteSurface Lumens 1900 cd/m^2 Minimum, All White Pixels Character Max Height 480 Pixels Viewable Dimensions (H x W) 8.66" (220.88 mm) x 2.23" (56.72 mm) Control Time via NTP - Text Controlled via Software Network Ethernet IEEE 802.3 10/100Base-T PoE IEEE 802.3 AF/AT Compliant VLAN IEEE 802.1q Tagging Protocols IP Addressing DHCP / Static Auto-Provisioning HTTP / TFTP Auto-Registration HTTP / Service Location Protocol / IEDNet Time NTP or Host Server Telephony SIP Enclosure Color White Grille Material Powder Coated Steel Baffle Material Plastic Mounting / Rigging Provisions 4 x Screws Safety Agency Ratings ETL Listed to Comply with 62368-1, CSA C22.2 #62368-1, IEC 62368-1 CB Scheme and FCC Logo One Color Print Dimensions (H x W x D) 14.37" (365 mm) x 12.87" (327 mm) x 3.42" (87 mm) Shipping Weight 6.56 lbs (2.98 kg) - Documents
- Reviews
Write Your Own Review