- Description
Details
Atlas Sound IP-HVP POE+ Weather and Vandal Resistant Wall Mount IP Speaker
The AtlasIED IPX Series IP-HVP is a vandal-proof, weather-resistant, wall mount IP speaker. It leverages VoIP communication to extend telepresence with enhanced audio for environments where network-wide communication is desired and high-output speakers are required to overcome high ambient noise and/or large spaces. The speaker grills are vandal and weather resistant. Manufactured of cast aluminum alloy, the grills provide security and durability in indoor and outdoor applications.
AtlasIED IP-HVP registers as a communication endpoint directly within InformaCast, GCK, and Revolution Advanced Notification applications, supporting audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded & scheduled announcements, while leveraging the WAN/ LAN Network Architecture.
When used within a Cisco Environment, the speakers can join Cisco’s Unified Survivable Remote Site Telephony (SRST) as a supported device. Cisco’s SRST provides remote location call-processing redundancy when access to the centralized Cisco Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination of phones and speakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).
Where 3rd party notification applications are not required, the IP-HVP vandal-proof, weather-resistant, wall mount IP can register as SIP devices directly to a SIP server or VoIP Communications Manager for critical alerts and public address applications.
- Features
Features
Network Features:
- Dynamic or static IP address
- IEEE802.3 10/100Base-T ethernet
- IEEE 802.1q tagging
- IEEE 802.11AT compliant
- VoIP standard audio: G.711 u-law/a-law (64 kbit/s) or G.722 wideband audio (64 kbit/s)
- Auto provisioning: DHCP option 66, 150, or TFTP server or DHCP option 72 for HTTP server
- Auto registration: SLP for InformaCast or DHCP option 72 for revolution or GCK
- Static configuration: HTTP GUI for static configuration or Cisco SRST
Audio Features:- Integrated amplifier 15W total power: primary speaker output 8 ohm
- Aux audio line-in unbalanced (2.8Vpp 10K)
- Aux audio line-out unbalanced (2.8Vpp 10K)
- 2 general purpose inputs
- 1 General purpose output (2A @ 30 VDC)
- Phone/night loud ringer
- External power supply option
- Specification
System Type PoE+ Vandal and Weather Resistant Wall Mount IP Speaker Indicators Network Status (On Back) Frequency Response (+/- 5dB) 600 - 14,000 Hz (Nominal) Vertical Coverage 95° (-6dB, 2000 Hz Octave Band) Horizontal Coverage 95° (-6dB, 2000 Hz Octave Band) Directivity Factor (Q) 7.3 @ 2 kHz Max SPL at 1m (Passive) 120dB at 15W (Peak) General Purpose Interface Two Trigger Inputs
One Relay Output (2A @ 30 VDC)Transducers LF Transducer Qty and Size (1) 3.8" (97 mm) Voice Coil Size 1.25" (32 mm) Cone Material Double Entrant Compression Driver Sensitivity 104dB at 1W / 1m Average Amplification Type Single-Channel Class D Topology with Primary and Secondary Outputs AC Power Input PoE or PoE+ and External 24VDC Power Rating (RMS) 12W Max (802.3AF) / 25W Max (802.3AT) THD <0.2% Cooling Passive / Convection Driver Protection Built-In Limiter Audio Inputs and Outputs Input: Analog Audio Type(s) One Balanced Line Level Input: Analog Connectivity Secured Screw Terminal Block Input: Network Audio Type(s) G.711 U-Law / A-Law and G.722 Capable Input: Network Connectivity RJ-45 female Output: Analog Audio Type(s) One Balanced Line Level Output: Analog Connectivity Secured Screw Terminal Block Output: Digital Audio Type(s) G.711 U-Law / A-Law and G.722 Capable (Multicast) Output: Speaker Level 8Ω, 12W (802.3AF), 25W (802.3AT) Output: Speaker Connectivity Primary and Slave Secured Screw Terminal Block Software GCK Compatible Version 3.0+ InformaCast Advanced Compatible Version 8.0+ InformaCast Fusion Compatible Version 3.0+ SA-Announce Compatible Versions 9.0.18+ Network Ethernet IEEE 802.3 10/100Base-T POE IEEE 802.3 AF/AT Compliant VLAN IEEE 802.1q Tagging Protocols IP Addressing DHCP / Static Auto-Provisioning HTTP / TFTP Auto-Registration HTTP / Service Location Protocol / IEDNet Time NTP or Host Server Telephony SIP Enclosure Color White Grille Material Powder Coated and Perforated Cast Aluminum Alloy Baffle Material 18-Guage Corrosion-Resistant Zinc Plated Steel Mounting / Rigging Provisions Mounting Enclosure is Not Included (See Optional Enclosure) Safety Agency Ratings ETL Listed to Comply with 62368-1, CSA C22.2 #62368-1, IEC 62368-1 CB Scheme and FCC Ingress Protection IP-45 Logo Silver and Black Dimensions (H x W x D) 10.75" (299 mm) x 10.75" (299 mm) x 4.5" (178 mm) Shipping Weight 6.54 lbs (3 kg) - Documents
- Reviews
Write Your Own Review