- Description
Details
The TX1152FM is a compact, high output dedicated floor monitor for use on small to medium-sized stages where high quality vocal and instrument applications are required in a lightweight package.
The TX1152FM enclosure utilizes Signal Synchronized Transducers (patent pending), a design that aligns the woofer and compression driver by locating them on separate baffles, and integrates a low distortion port between the baffles. This offers tremendous advantages over traditional flat baffle construction: the acoustic centers of the woofer and compression driver are closer together, synchronizing arrival time; the voice coils of the compression driver and woofer are in the same plane, achieving linear phase response; and the size of both baffles are smaller than a single baffle; resulting in a smaller footprint.
The TX1152FM utilizes the DH3, a high output 1.25" titanium compression driver, coupled to a Constant Directivity™ 90° x 50° horn. The SMX2151 15" woofer has an FEA optimized magnet structure and shorting ring for ultra low distortion. The crossover uses steep 24 dB/octave slopes with equalization for very smooth response in vocal range, and has a built in protection circuit for long term reliability. The combination of the transducers, enclosure, and crossover result in a compact floor monitor that is capable of very high output levels before feedback.
The TX1152FM has a variety of features that make it suited as a dedicated floor monitor. The internally braced, enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoatTM for maximum strength and durability.- Features
Features
- Two-way, high-output design
- Vented LF enclosure
- Neutrik Speakon® paralleled pass-through connectors
- Two integrated handles
- Ideal for small-to-medium stages
- Signal Synchronized Transducers™ for woofer/tweeter alignment
- Ultra low-distortion SMX2151 woofer with fully symmetric drive
- 1.25" DH3/2010A titanium HF compression driver
- Constant-directivity 90º H x 50º V horn
- Integrated 24 dB/octave crossover with HF protection
- 100 dB sensitivity, 133 dB maximum SPL
- Power handling: 500W continuous, 2000W peak
- Black EVCoat™ finish
- Specification
Frequency Response (-3 dB) 65 Hz - 20 kHz Frequency Range (-10 dB) 45 Hz - 20 kHz Rec. Hipass Frequency 45 Hz Axial Sensitivity 100 dB (1W/1m) Max. Calculated SPL 133 dB Horizontal Coverage 90° Vertical Coverage 50° Power Handling 500W Continuous, 2000W Peak LF Transducer SMX2151, 15" (381 mm) Driver HF Transducer DH3, 1.25" (32 mm) Diaphragm Compression Driver Crossover Frequency 1750 Hz Nominal Impedance 8 Ohms Minimum Impedance 6.2 Ohms Connectors (2) Neutrik Speakon NL4’s Enclosure Material Plywood and MDF with EVCoat Grille 16 GA Steel, Black Powdercoat, with Rotatable Logo Dimensions (H x W x D) 18.7" (475 mm) x 17.3" (439 mm) x 25.8" (655 mm) Net Weight 51.9 lbs (23.5 kg) Shipping Weight 59.4 lbs (27 kg) - Documents
Documents
- Reviews
Write Your Own Review