Search results for 'Williams Sound PPA'

This optional front door has right or left-hand hinging capability and must be customer-installed following simple included drilling template.

The Atlas Sound AWR2W 2RU Tilt Out Wall Cabinet features convenient access and lock-in security for 19" equipment. This re-designed welded model can be surface or recessed mounted (trim ring included) and include a 3RU panel ­opening above the main bay for connector panels or power distribution.

The Atlas Sound AWR3W 3RU Tilt Out Wall Cabinet is a features convenient access and lock-in security for 19" equipment. This re-designed welded model can be surface or recessed mounted (trim ring included) and include a 3RU panel ­opening above the main bay for connector panels or power distribution.

The Atlas Sound 912-18 12RU Stackable Utility Frame is uniquely engineered to provide assembled strength and shipping/storage economy. This low-cost, innovative unit features quick and simple assembly, and the versatility of the 912-18 allows the frames to be easily stacked.

The AtlasIED 607-15 7RU stand alone basic wall cabinet is a surface mounting wall cabinet used for housing small electronic system installations including 19" wide amplifiers, tuners and associated communication controls for schools, churches, clubs and recreation facilities.

This welded assembly provides desk-top access to (19") control and monitor equipment.

The Atlas Sound 121-18 21 RU floor rack is 22 5/16" wide, 18 1/2" deep, and contains 21RU vertical panel spaces. The 121-18 cabinet includes one pair of 11-gauge CRS fixed mounting rails.

The Atlas Sound AWR2W-HR 2RU Tilt Out Half Rack Wall Cabinet offers convenient access, lock-in security, and welded construction that can be surface or recessed mounted. It is designed to install within standard 16" stud wall construction, reducing installation time and the need to cut and repair dry wall.

The Atlas Sound AWR3W-HR 3RU Tilt Out Half Rack Wall Cabinet offers convenient access, lock-in security, and welded construction that can be surface or recessed mounted. The AWR3W-HR is designed to install within standard 16" stud wall construction, reducing installation time and the need to cut and repair dry wall.

The Atlas Sound 124-18 24 is a 24 RU floor rack. The cabinets are welded 16-gauge CRS and assembled for immediate use. Rear doors are hung with quick-release spring hinges which allow them to be rotated 180˚ for right- or left-hand opening.

The Atlas Sound WMA16-23 is a high strength cabinet used to house electronic equipment for any type of application, both commercial and residential, where a floor standing cabinet is not practical. Applications include communications equipment, audio-video equipment, security systems, CCTV equipment, IT equipment, industrial systems, and computer equipment. Shown with optional front door.

The Atlas Sound 135-18 35RU Floor Rack offers installer-friendly advantages, including an expanded 6RU opening in the cabinet top and bottom which can be left open for wire access and/or ventilation, or closed using a standard vent or solid panels. Rear doors (included with all models) are hung with quick-release spring hinges which allow them to be rotated 180° for right or left-hand opening.

The economical Atlas Sound 40-18 40RU floor rack cabinet is 22 5/16" wide, 18 1/2" deep, and contains 40RU vertical panel spaces. The cabinet includes one pair of 11-gauge CRS fixed mounting rails. It is constructed of 16-gauge CRS and includes base, top panel, side panels, mounting rails, a removable rear door with cylinder lock and flush door pull handle.

The Atlas Sound 144-18 44RU Floor Rack is 18 1/2" deep, 22 5/16"" wide, 40RU high. The cabinet is welded 16-gauge CRS and assembled for immediate use. Rear doors are hung with quick-release spring hinges which allow them to be rotated 180˚ for right- or left-hand opening. Rear door includes flush door handle and cylinder lock. See chart on back for appropriate Optional front door model numbers. If front door is ordered, it will be keyed differently than the rear door for security.

The Atlas Sound 316-15 16RU wide opening wall cabinet is welded with center-section depths of 15". It includes three, 16-gauge CRS sections which include a 2" deep, solid-steel front door, a 15" deep center section with adjustable mounting rails, and a 4 1⁄2" deep rear door.

The Atlas Sound CR212 is a 2U, 9.25" half-rack in-ceiling mounted equipment rack with an integrated AC power pack and auto-sensing "on-off" that allows electronic equipment to be conveniently installed out of sight, in the ceiling plenum.

The Atlas Sound CR212P is a 2U, 9.25" half-rack in-ceiling mounted equipment rack with an integrated AC power pack, auto-sensing "on-off" and a projector pole adapter that allows electronic equipment to be conveniently installed out of sight, in the ceiling plenum.

The 2'x2' Atlas Sound CR222 is a 2U, 19" wide in-ceiling mounted equipment rack with an integrated AC power pack and auto-sensing "on-off" that allows electronic equipment to be conveniently installed out of sight, in the ceiling plenum.

The 2'x2' Atlas Sound CR222 is a 2U, 19" wide in-ceiling mounted equipment rack for with an integrated AC power pack, auto-sensing "on-off" and a projector pole adapter that allows electronic equipment to be conveniently installed out of sight, in the ceiling plenum.

The Atlas Sound 410-15 10RU desktop cabinet rack is a welded rack that provides desk-top access to (19") control and monitor equipment. The 410-15 is 16-gauge CRS and includes one pair of mounting rails, tapped 10-32, hardware and wiring access below rear door or panel.

The Atlas Sound 307-12 7RU wide opening wall cabinet is welded with center-section depths of 12" and 15", respectively. It includes three, 16-gauge CRS sections which include a 2" deep, solid-steel front door, a 12" or 15" deep center section with adjustable mounting rails, and a 4.5" deep rear door.

The AtlasIED WMA10-23 10G wall cabinet is 16-gauge, welded with 18" deep center-section and adjustable mounting rails, and a 4.5" deep rear section. Equipped with provisions for custom cabinet mounting, wire man­agement, equipment mounting, and structural support.

The Atlas Sound CR212-NR is a 2U, 9.25" half-rack in-ceiling mounted equipment rack with an integrated AC power pack that allows electronic equipment to be conveniently installed out of sight, in the ceiling plenum.