Search results for '%22anchor audio AN-135%2B%22'
-
Pyle Audio PSS4 Stereo Speaker Selector
The Pyle Audio PSS4 Stereo Speaker Selector lets you connect up to four separate pairs of speakers to your stereo receiver/amplifier. The control center is especially convenient if you have speaker sets in different rooms and want to turn them on and off independently.
-
Rolls MX42 4-Channel Passive Mini Stereo Mixer
The MX42 is a four channel stereo passive (requiring no power) mixer. The unit mixes up to four stereo RCA signals such as CD or cassette players with VCR units, even computer sound cards or MP3 players.List $89.00Price $69.00Savings $20.00 (22%) -
Rolls MX51s Mini-Mix II 4-Channel Stereo Line Mixer
The Rolls MX51s Mini Mix 2 is small four-channel mixer with individual volume controls, and a headphone / line output. The unit has one XLR input along with an 1/8” input and 3 sets of stereo RCA inputs.
List $89.00Price $69.00Savings $20.00 (22%) -
Rolls MX41B 4-Channel Passive Mixer with Level Control
The Rolls MX41b is a stereo four channel passive mixer for expanding a console mixer, mixing instruments, CD players, cassette players, computers etc. It requires no batteries or other power source.List $99.00Price $79.00Savings $20.00 (20%) -
Pyle Audio PSPVC4 Stereo Speaker Selector with Volume Control
The Pyle Audio PSPVC4 Stereo Speaker Selector with Volume Control lets you connect up to four (PSPVC4) or six (PSPVC6) separate pairs of speakers to your stereo receiver/amplifier. The control certer is especially convenient if you have speaker sets in different rooms and want to turn them on and off independently.
-
Ashly Audio FA-125.4 4-Channel 125W Hi-Density Power Amplifier
The Ashly FA-125.4 is designed for easy and flexible placement, to go where other amps cannot: Under conference tables, behind displays, inside kiosks...anywhere high-quality reliable power is needed, but space is limited. The FA Series is that neat audio magic trick that gives your project the performance you need...without the bulk, heat, and power-consumption you don't.
-
Crown Audio 160MA 60W 4-Input Commercial Mixer Amplifier 8 Ohm and 70V 100V Outputs
The Crown 160MA is a high value mixer-amplifier for commercial audio in the Crown Commercial Audio Series of mixer-amplifiers.
-
Ashly Audio FA-250.4 4-Channel 250W Hi-Density Power Amplifier
The Ashly FA-250.4 is designed for easy and flexible placement, to go where other amps cannot: Under conference tables, behind displays, inside kiosks...anywhere high-quality reliable power is needed, but space is limited. The FA Series is that neat audio magic trick that gives your project the performance you need...without the bulk, heat, and power-consumption you don't.
-
Ashly Audio FA-125.4 4-Channel 125W Hi-Density Power Amplifier (Open Box)
Free Shipping!The Ashly FA-125.4 is designed for easy and flexible placement, to go where other amps cannot: Under conference tables, behind displays, inside kiosks...anywhere high-quality reliable power is needed, but space is limited. The FA Series is that neat audio magic trick that gives your project the performance you need...without the bulk, heat, and power-consumption you don't.
List $874.00Regular Price: $699.00
Pro Acoustics Price $629.99
Savings $244.01 (28%) -
American Audio WM 419 4-Channel Wireless UHF Handheld Microphone System
The American Audio WM-419 is a 4-channel UHF wireless microphone system that includes four wireless microphones, a wireless receiver with individual volume control and XLR audio output for each microphone, batteries and four mic clips.
-
Ashly Audio Pema 4125 4-Channel Power Amplifier 4 x 125W @ 4 ohms with Protea DSP
The Ashly Pema 4125 DSP processor features a new sleek look, 4-channel at 125 watts per channel at 4Ω. The Pema is a matrix mixer with 8-in x 8-out, where any input can be assigned to any output or outputs.
-
Ashly Audio Pema 4125.70 4-Channel Power Amplifier 4 x 125W @ 70V with Protea DSP
The Ashly Pema 4125.70 DSP processor features a new sleek look, 4-channel at 125 Watts per channel. The Pema is a matrix mixer with 8-in x 8-out where any input can be assigned to any output or outputs.
-
Ashly Audio Pema 4250 4-Channel Power Amplifier 4 x 250W @ 4 ohms with Protea DSP
The Ashly Pema 4250 DSP Processor is a Protea-Equipped Media Amplifier—either 4-channel at 250 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out matrix mixer, where any input can be assigned to any output or outputs. Pema is a digital signal processor.
-
Ashly Audio Pema 4250.70 4-Channel Power Amplifier 4 x 250W @ 70V with Protea DSP
This Ashly Pema 4250.70 powered digital signal processor consists of 8 inputs and 4 power amplifier outputs with the ability to assign any input to any output. This DSP paired PEMA amplifier lowers overall system cost, occupies less space, improves energy efficiency, and both speeds and simplifies system installation and programming.
-
Ashly Audio CA-504 4-Channel 4 x 500W at 4 Ohm Power Amplifier
The Ashly CA-504 amp is designed to excel in performance installations, such as theaters, school auditoriums and Houses of Worship. However, with 70 and 100V direct-drive capability and more integration-friendly features than you'd typically find on many amplifiers, they are also right at home in commercial installations. Push them hard. They can take it.
-
Ashly Audio CA-1.04 4-Channel 4 x 1000W and 4 Ohm Power Amplifier
The Ashly CA-1.04 amp is designed to excel in performance installations, such as theaters, school auditoriums and Houses of Worship. However, with 70 and 100V direct-drive capability and more integration-friendly features than you'd typically find on many amplifiers, they are also right at home in commercial installations. Push them hard. They can take it.
-
Ashly Audio CA-1.54 4-Channel 4 x 1500W and 4 Ohm Power Amplifier
The Ashly CA-1.54 amp is designed to excel in performance installations, such as theaters, school auditoriums and Houses of Worship. However, with 70 and 100V direct-drive capability and more integration-friendly features than you'd typically find on many amplifiers, they are also right at home in commercial installations. Push them hard. They can take it.
-
Octasound RASX4 4-Channel Remote Audio Selector
The Octasound RASX4 is so simple to operate no manual or in-depth training is required. Select a channel, turn the volume up or down.
-
Crest Audio Ci 30x4 4 Channel Amplifier
The Crest Audio Ci 30x4 amplifier is designed to drive low-impedance or 70V speaker loads without bridging between channels. Bridged operations are supported for additional power into 8 ohm loads or 140V operation.
-
Blaze PowerZone 504 500W 4-Channel Install Power Amplifier
The Blaze Audio PowerZone 504 install power amplifier is designed to provide affordable, versatile, and reliable high-performance audio power. -
Blaze PowerZone 1004 1000W 4-Channel Install Power Amplifier
The Blaze Audio PowerZone 1004 install power amplifier is designed to provide affordable, versatile, and reliable high-performance audio power. -
Ashly Audio ne4400 Network-Enabled Protea DSP Processor
Complimentary to Ashly's amplifiers, the Ashly ne4400 DSP Audio Processor offers easy setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.
-
OWI MC4 Four-Channel Audio Control Mixer
The OWI MC4 will allow either line or mic level inputs on each channel. It has an additional four sets of level controls to provide a fixed secondary output not affected by any of the changes on the front panel level input controls.
-
Ashly Audio MA 250.4 Ultra-High Efficiency 4-Channel Power Amplifier 4 x 250W at 8 Ohms
The Ashly Audio MA 250.4 power amplifier is a compact and powerful audio amplification solution designed for professional audio applications. With its sleek design and robust construction, the MA 250.4 delivers exceptional sound quality and reliability in a space-saving form factor.