Search results for 'dante'
-
Attero Tech unHX2D Dante/AES67 Networked HDMI Audio De-Embedder/Embedder Interface
The Attero Tech unHX2D is a Dante enabled HDMI de-embedder/embedder designed to bridge 2-channel PCM HDMI audio to/from a Dante/AES67 audio network. In addition, the unHX2D includes two line-level analog inputs and outputs that can be independently bridged to/from a Dante/AES67 audio network.
-
Attero Tech unDIO2X2+ 2x2 Channel Mic/Line I/O Dante Networked Audio Interface
The Attero Tech unDIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dante-based networked audio system. The small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.
-
Attero Tech unD4O Dante/AES67 Networked Audio Interface
The Attero Tech unD4O Dante interface is a 4 output, cost-effective way to add up to four analog output channels to an existing Dante-based networked audio system. The unD4O's small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio sink - thereby eliminating costly and interference prone analog wiring. The unD4O is powered by either external +24VDC or any PoE network switch.
-
Atlas Sound IED1544AIO-D 4 x 4 Analog/Dante I/O Module
The Atlas Sound IED1544AIO-D is a 4-input x 4-output mic/line-level analog pre-amplifier that converts analog audio signals to Dante® network audio. Multiple channels of Dante® network audio can be transported over standard IP networks.
List $979.99Price $785.99Savings $194.00 (20%) -
Attero Tech unD4I-L 4-Channel Mic/Line In Dante/AES67 Networked Audio Interface
The Attero Tech unD4I-L four input Dante interface is the ideal device for adding mic/line inputs to a Dante system. The addition of four logic outputs allows easy interface with microphone switches and indicator LEDs. The unD4I-L features four balanced mic/line inputs, each with software selectable +48V phantom power and 8 gain levels. Front panel indicators show each channel's gain and phantom power status for easy troubleshooting.
-
Atlas Sound DA-PM8GD-B 8" Pendant Mount PoE Dante Speaker System - Black
The AtlasIED DA-PM8GD is an 8" indoor pendant mount IP PoE amplified loudspeaker featuring Audinate’s Dante digital audio transport platform. The DA-PM8GD supports a 8" efficient speaker design with a sensitivity of 98dB 1W/1m and a maximum output of 109dB. -
Atlas Sound DA-APX PoE+ Dante Outdoor Weather Resistant Horn Speaker
The AtlasIED DA-APX is a weather resistant IP PoE amplified constant directivity high-output horn featuring Audinate’s Dante digital audio transport platform. The DA-APX features a 60° x 40° constant-dispersion pattern across the controlled frequency band of 1.25-10 kHz. -
Stewart Audio CVA16-1-CV Single-Channel Dante Subcompact PoE+ Amplifier 16W x 1 @ 70V/100V
The Stewart Audio CVA16-1-CV PoE+ compact Dante amplifier is designed to be a single cable solution for smaller zones without the need for a local power outlet. This amplifier leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.
-
Stewart Audio CVA40-1-CV-D Single-Channel Dante Subcompact PoE++ Amplifier 40W x 1 @ 70V/100V
The Stewart Audio CVA40-1-CV-D PoE++ compact Dante amplifier is designed to be single cable solutions for small/medium zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.
-
Attero Tech Axon D2FLEXio Dual Analog Flex I/O Dante/AES67 Interface
The Attero Tech D2FLEXio provides cost-effective analog audio connectivity for installed AV systems. The small, unobtrusive form factor provides easy installation - anywhere.