Search results for 'dante'
-
Attero Tech unHX2D Dante/AES67 Networked HDMI Audio De-Embedder/Embedder Interface
The Attero Tech unHX2D is a Dante enabled HDMI de-embedder/embedder designed to bridge 2-channel PCM HDMI audio to/from a Dante/AES67 audio network. In addition, the unHX2D includes two line-level analog inputs and outputs that can be independently bridged to/from a Dante/AES67 audio network.
-
Attero Tech unDIO2X2+ 2x2 Channel Mic/Line I/O Dante Networked Audio Interface
The Attero Tech unDIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dante-based networked audio system. The small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.
-
Atlas Sound IED1544AIO-D 4 x 4 Analog/Dante I/O Module
The Atlas Sound IED1544AIO-D is a 4-input x 4-output mic/line-level analog pre-amplifier that converts analog audio signals to Dante® network audio. Multiple channels of Dante® network audio can be transported over standard IP networks.
List $979.99Price $785.99Savings $194.00 (20%) -
Shure ANI22-XLR ANIUSB MATRIX USB Audio Network Interface
The Shure ANI22 Audio Network Interface provides 2 channels of Dante-to-analog and 2 channels of analog-to-Dante conversion. A single interface provides a simple way to connect analog equipment to the audio network, such as wireless microphones, audio processors, video codecs, and loudspeaker systems.
-
Shure ANI22-Block ANIUSB MATRIX USB Audio Network Interface
The Shure ANI22 Audio Network Interface provides 2 channels of Dante-to-analog and 2 channels of analog-to-Dante conversion. A single interface provides a simple way to connect analog equipment to the audio network, such as wireless microphones, audio processors, video codecs, and loudspeaker systems.
-
Atlas Sound TSD-DAC2I 2-Channel Balance Line Input to Dante Interface
The Atlas Sound TSD-DAC2i is a PoE 2-channel analog pre-amplifier that converts analog audio signals into Dante® digital audio. The TSD-DAC2i can be used for any Analog to Dante® digital audio endpoint but is ideally suited to be used with the Atlas Sound WTSD wall mixer series.
List $503.99Price $404.99Savings $99.00 (20%) -
Bose ControlSpace ESP-1240AD Sound Processor with Dante Audio Networking (Discontinued)
The Bose ControlSpace ESP-1240AD engineered sound processor is an upgraded model that includes options for Dante audio networking and Bose AmpLink connectivity. -
Bose ControlSpace ESP-880AD Sound Processor with Dante Audio Networking (Discontinued)
The Bose ControlSpace ESP-880AD engineered sound processor is an upgraded model that includes options for Dante audio networking and Bose AmpLink connectivity. -
EAW RSX89 2 Way Self-Powered Loudspeaker 90° × 60°
The EAW RSX89 features onboard bi-amplified electronics (500W RMS/1000W peak) featuring signature EAW DSP including Focusing and DynO for pristine impulse response.
-
EAW RSX129 2 Way Self-Powered Loudspeaker 90° × 60°
The EAW RSX129 features onboard bi-amplified electronics (500W RMS/1000W peak) featuring signature EAW DSP including Focusing and DynO for pristine impulse response.
-
Williams Sound WF T5 D WaveCAST Assistive Listening System Interface with Dante
The Williams Sound WaveCAST with Dante is a Wi-Fi platform designed for pro-audio applications where high-quality sound is required. It is built on a hardware-based DSP audio system architecture, allowing system optimization to achieve the highest quality experience for the particular audio stream being delivered.
-
RCF XPS 16KD 4 x 4000W Dante-Equipped DSP Power Amplifier
The RCF XPS 16KD is a four-channel power amplifier with advanced processing and advanced routing with Dante, digital and analog I/O for both touring and install use. With 4x4000W Class D continuous power at 2.7 ohms, 40-bit floating-point processing at 96 kHz, and 32-bit internal routing, XPS 16K packs extreme power density in a 2U chassis. -
Attero Tech Axon D2FLEXio Dual Analog Flex I/O Dante/AES67 Interface
The Attero Tech D2FLEXio provides cost-effective analog audio connectivity for installed AV systems. The small, unobtrusive form factor provides easy installation - anywhere.
-
EAW RADIUS RSX Line Array Package
Customizable EAW RADIUS Line Array packages. Optimal sonic performance has never been easier or more accessible, and system design and control has never been more approachable.
-
Atlas Sound IED1544ZOP 4x4 Smart Zone Output Processor
The Atlas Sound IED1544ZOP 4x4 Smart Zone Output Processor provides all the network audio routing and zone digital signal processing functions of a DNA2404D integrated network amplifier unit. This includes Dante™ network audio input, equalization, level control, and IED's patented AlwaysHEARTM smart ambient analysis automatic level adjustment.
List $3,556.99Price $2,847.99Savings $709.00 (20%) -
Community ALC-404D 4-Channel x 400W Amplified Loudspeaker Controller with DSP and Dante
Community's line of Amplified Loudspeaker Controllers (ALC) offers factory-optimized DSP processing, protective limiting and amplification, as well as signal routing, zone switching, and remote monitoring for virtually any Community loudspeaker application.
-
SoundTube IPD-Hub 2 DSP 2-Channel Amplifier
The SoundTube STNet Hub 2 DSP amplifier gives designers and installers an IP-based option for traditional 70V/100V distributed audio systems in small to midsize applications.
-
Shure ANIUSB MATRIX USB Audio Network Interface
The ANIUSB-MATRIX USB Audio Network Interface offers the ideal performance, connectivity, and affordability for audio/video conferencing installations in small and medium-size meeting rooms when a premium microphone solution is desired, and acoustic echo cancellation of an A / V conferencing codec will be used.
-
EAW RSX12 12" Self-Powered Line Array Subwoofer
The EAW RSX12 12" subwoofer is flyable and ultra-compact, ideal for installs or other applications with minimal floor space for subwoofers.
-
EAW RSX218 Dual 18" Self-Powered Subwoofer
Designed to streamline setup and deliver maximum results in minimum time, RADIUS couples unique and intelligent features with EAW's signature acoustical design to deliver solutions for rental firms and system integrators.
-
EAW RSX208L 500W 8" 3-Way Self-Powered Line Array Loudspeaker
The EAW RADIUS RSX208L articulated array features OptiLogic, providing automatic array self-detection and instant optimization including air loss compensation and more.
-
EAW RSX212L 12" 2-Way Self-Powered Line Array Loudspeaker
The EAW RADIUS RSX212L articulated array features OptiLogic, providing automatic array self-detection and instant optimization including air loss compensation and more.
-
Bose ControlSpace ESP-1240 Signal Processor (Discontinued)
The Bose® ControlSpace® ESP-1240 engineered sound processor is an open-architecture DSP with 12x4 fixed analog audio, built-in 8-channel ESPLink output and a rear-panel digital expansion slot offering IP-based network audio and control card options.
-
RCF XPS 16K 4 x 4000W DSP Power Amplifier
The RCF XPS 16K is a four-channel power amplifier with advanced processing and analog/digital routing options for both touring and install use. With 4x4000W Class D continuous power at 2.7 ohms, 40-bit floating-point processing at 96 kHz, and 32-bit internal routing, XPS 16K packs extreme power density in a 2U chassis.