Search results for 'Bose AMM'

Bose RoomMatch® DeltaQ™ array loudspeakers are designed for permanent installation in the finest performing arts centers, auditoriums, sports arenas, dance clubs and houses of worship.

Bose RoomMatch® DeltaQ™ array loudspeakers are designed for permanent installation in the finest performing arts centers, auditoriums, sports arenas, dance clubs and houses of worship.

Bose RoomMatch® DeltaQ™ array loudspeakers are designed for permanent installation in the finest performing arts centers, auditoriums, sports arenas, dance clubs and houses of worship.

The RoomMatch DeltaQ Large Array Rigging Frame is for use with 4 to 8 RoomMatch full-range or subwoofer modules in overhead suspended arrays.

The Bose RMGSBK Ground Stack Base Kit can be used with up to three (3) RoomMatch modules for ground stack arrays.

Converts RoomMatch RMGSBK ground stacked arrays into a movable configuration.

Attaches to subwoofer module and mounts one or two RoomMatch full-range modules, allowing pitch angle adjustment from 0 to 30 degrees down pitch (differs by module vertical coverage pattern). Complete pitch bracket is formed by assembly of pitch plate that attaches to subwoofer module and mounting bar that attaches to RoomMatch full-range modules.

Provides subwoofer-to-subwoofer module connection for ground stack arrays.

Set of 4 quick-release pins designed to replace the graded M10 fasteners for module-to-module connections. May be used with RoomMatch® full-range or subwoofer modules.

Use with bottom-most array module to provide third-point suspension to building structure to allow more extreme downward angle of arrays than possible from 2-point, gravity-hang suspension.

An accessory side-plate rigging kit for the RoomMatch® RMS215/RMS218 subwoofer module to allow integration of subwoofer modules in RoomMatch arrays.

Optional accessory that installs in the input panel of RoomMatch full-range modules to allow attenuation of the bottom-3 compression drivers as compared to the top 3 drivers. This allows for more uniform sound pressure levels for specific module configurations and coverage areas.

The ControlSpace EP40-D 4 input Dante endpoint is the ideal interface for adding mic/line inputs to a Dante system. The small form factor of the EP40-D allows it to be mounted almost anywhere, putting it close to audio sources and minimizing interference-prone analog wiring.

The ControlSpace WP22B-D Dante audio Interface is a cost effective multi-I/O wall box. The WP22B-D features two balanced mic/line XLR inputs and two balanced XLR line outputs.

This Auditorium Sound System with Bose loudspeakers is a pre-configured versatile full range loudspeaker system for your school auditorium or any small to large auditorium venues.

Bose SB-82 Flying Bracket for Stacked Pair For Fly Mounting 802 Loudspeaker Pair.

Medium-format waveguide and 60° x 40° pattern designed as the primary reinforcement source for smaller venues, or for use with other LT loudspeakers to form Coherent Zone arrays in medium to large venues.

The Bose RMUXF40 40-watt transformer kit fits all new RoomMatch® Utility loudspeaker models after removing the standard input connector panel.

The Bose® FreeSpace® 203® loudspeaker is a full-range surface-mount loudspeaker designed for foreground music and speech reproductions. It features 115° x 150° coverage pattern and a frequency range down to 45 Hz.

This Bose® conference room sound system covers 5,000 sq ft. and can be expanded beyond that for further coverage and control over separate zones and paging. Any audio source such as a laptop, iPod, iPad, XM Radio, or a simple CD player can be used.

Bose® MB24 Modular Bass Loudspeaker’s compact 2 x 12" (305 mm) configuration allows minimal-height arrays when used with LT mid/high loudspeakers. Bose® Modeler® tools and optional rigging hardware make directional bass arrays easy to design and install using MB24 loudspeakers.

The Bose® MB12 Modular Bass Loudspeaker is designed to provide bass augmentation for Bose® LT arrays and other subwoofer applications. The compact 1 x 12" (305 mm) configuration allows minimal-height arrays when used with LT mid/high loudspeakers.