Search results for 'Crown CDi series'

The Bogen Communications CA10A is a 2-position room switch designed for use with SBA-Series room selector panels. When the switch is pressed, the annunciator lamp on the SBA-Series switch bank illuminates, designating the calling station. When the switch is released, the lamp remains illuminated until the call is answered. The switch is designed for flush mounting in a standard single-gang outlet box.

The JBL CSS8004 Commercial Series ceiling speakers feature high sensitivity, providing maximum sound level, even at low tap settings.

The AtlasIED 76-8E2 8 inch Mounting Ring with is used for installing screw mount baffles for 8" loudspeakers as well as 95 series enclosures for new construction drywall applications. The unit includes mounting ears to facilitate 16" or 24" OC stud mounting.

The Atlas Sound FAPR-4 Plaster Ring is used to mount Strategy Series 4" loudspeakers into ceilings and walls for applications where an enclosure cannot be used, or where it is not desired.

The Atlas Sound CR212TRK kit provides two brackets so the CR enclosure can be suspended via threaded rod. The CR212TRK brackets have supplied holes for threaded rod and nuts to be installed from the structure to the CR enclosure.

The Atlas Sound AT10 plate mounted attenuator is part of a high-quality auto transformer series that provides the advantages of excellent frequency response, low insertion loss and reliable performance for volume control applications in 25 and 70.7-volt systems.

The Yorkville CM5/70 Coliseum Mini Series in-ceiling speaker is a 30W 5" high-performance loudspeaker that has built-in 70V taps at 5, 10 or 20W as well as optional 8 ohm (30W) operation.

The Audio-Technica AT8631 joining plate is compatible with System 10 PRO, 3000 Series (Third and Fourth Generation), 2000 Series, ATW-DA49 and ATDM-0604 Digital SmartMixer®. Allows two half-rack units to be mounted in a single 19" rack space. Includes mounting screws.

The Anchor Audio SB-3BK+ Swivel Bracket can tilt 40 degrees. For use with all versions of the AN series speakers.

The CBI MLU series is the definitive "Tour Grade" Pro Sound microphone cable, made with the "Ultimate" 20 gauge braided shield and uses Neutrik XX Series XLR connectors.

The Anchor Audio SB-360BK+ Swivel Bracket can swivel 360 degrees. It is for use with the AN-130+ Product Line, the AN-135+ Product Line, the AN-100CM+ Product Line, and the AN-1000X+ Product Line. It is also compatible with the New ("plus") and Old ("nonplus") versions of the AN series.

The Mackie SPM200 Speaker Pole fits Thump, SRM and HD Series loudspeakers.

The Switchcraft 366R Impedance Adapter are the newest additions to Switchcraft's expanding line of premium pro audio products. They can be used as stand-alone adapters, rear mounted into the modular QGPK Series rack panels, or permanently installed into any number of custom racks and wall plates.

The Middle Atlantic HP Rackscrews are standard 3/4" long rack screws with 10-32 threads feature self-guiding pilot points. HP Series truss head screws provide a clean, modern appearance and fit under optional trim strips, for the most attractive finish. Includes factory-installed nylon washer.