Search results for 'dante'
-
Stewart Audio FLX-E-320-1-CV-D Mono DSP Enabled Amplifier 1 x 320W @ 70/100V Dante Network Enabled
The Stewart Audio FLX-E-320-1-CV-D is a single channel, 70V/100V, 1/2 rack amplifier delivering 320W audio power with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control. The FLX-E-320-1-CV-D amplifier supports Dante™ audio.
-
Community ALC-404D 4-Channel x 400W Amplified Loudspeaker Controller with DSP and Dante
Community's line of Amplified Loudspeaker Controllers (ALC) offers factory-optimized DSP processing, protective limiting and amplification, as well as signal routing, zone switching, and remote monitoring for virtually any Community loudspeaker application.
-
Community ALC-3202D 2-Channel x 3200W Amplified Loudspeaker Controller with DSP and Dante
Community's line of Amplified Loudspeaker Controllers (ALC) offers factory-optimized DSP processing, protective limiting and amplification, as well as signal routing, zone switching, and remote monitoring for virtually any Community loudspeaker application.
-
Community ALC-1604D 4-Channel x 1600W Amplified Loudspeaker Controller with DSP and Dante
Community's line of Amplified Loudspeaker Controllers (ALC) offers factory-optimized DSP processing, protective limiting and amplification, as well as signal routing, zone switching, and remote monitoring for virtually any Community loudspeaker application.
-
Atlas Sound IP108-D-CS GLOBALCOM IP Announcement Control System with 8 Dante Message Channels
The Atlas IP116-D-CS Announcement Control System (aka ACS) is the heart of AtlasIED's next-generation GLOBALCOM®. IP enterprise-wide communications management system. It manages the flow of announcements and messages between network endpoints such as digital communication stations, zone controllers, network power amplifiers, IP-based speakers and other types of IP endpoints.
-
Atlas Sound IP116-D-CS GLOBALCOM IP Announcement Control System with 16 Dante Message Channels
The IP116-D-CS Announcement Control System (aka ACS) is the heart of AtlasIED's next-generation GLOBALCOM®.IP enterprise-wide communications management system. It manages the flow of announcements and messages between network endpoints such as digital communication stations, zone controllers, network power amplifiers, IP-based speakers and other types of IP endpoints.
-
Stewart Audio DSP100-2-LZ-D 2-Channel DSP Enabled Amplifier 2 x 100W @ 4/8 Ohms Dante Network Enabled
The Stewart Audio DSP100-2-LZ-D is an affordable, 2 channel, 4/8 Ohm, 1/2 rack amplifier delivering 100W per channel with built-in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-2-LZ-D supports Dante™ audio.
-
Williams Sound FM 558 PRO D FM Plus Large Area Dual FM and Wi-Fi Assistive Listening System with Dante and Rack Panel Kit (4 Receivers)
The Williams Sound FM 558 PRO D is an FM+ large-area dual FM and Wi-Fi assistive listening system with Dante that comes with an FM T55 D transmitter, 4 PPA R38N receivers, 4 earphones and 2 neckloops, 2 chargers with rechargeable batteries, a remote coaxial antenna, an ADA wall plaque and a rack panel kit for professional installation.
-
Williams Sound FM 558-12 PRO D FM Plus Large Area Dual FM and Wi-Fi Assistive Listening System with Dante and Rack Panel Kit (12 Receivers)
The Williams Sound FM 558-12 PRO D is an FM+ large-area dual FM and Wi-Fi assistive listening system with Dante that comes with an FM T55 D transmitter, 12 FM R38 receivers, 12 earphones, 3 neckloops, a 12-bay charger, rechargeable batteries, a remote coaxial antenna, an ADA wall plaque and a rack panel kit for professional installation.
-
Cambridge Qt X 800D 8 Zone Sound Masking Generator and Control Module with Dante Media Network
The Cambridge Qt X 800D control module is a sound masking generator, controller, third-octave band equalizer and amplifier, with two auxiliary audio inputs to allow for distribution of audio from paging controllers and/or (background) music players. -
Cambridge Qt X 300D 3 Zone Sound Masking Generator and Control Module with Dante Media Network
The Cambridge Qt X 300D control module is a sound masking generator, controller, third-octave band equalizer and amplifier, with two auxiliary audio inputs to allow for distribution of audio from paging controllers and/or (background) music players. The Qt X 300D controls up to three zones of Qt standard or active emitters. -
Cambridge Qt X 600D 6 Zone Sound Masking Generator and Control Module with Dante Media Network
The Cambridge Qt X 600D control module is a 6-zone sound masking generator, controller, third-octave band equalizer and amplifier, with two auxiliary audio inputs to allow for distribution of audio from paging controllers and/or (background) music players. -
Cambridge Qt X 805D 8 Zone Sound Masking Generator and Control Module with Pre-Amp Outputs and Dante Media Network
The Cambridge Qt X 805 control module is a sound masking generator, controller, third-octave band equalizer and amplifier, with two auxiliary audio inputs allowing for audio distribution from paging controllers and/or (background) music players. -
Atlas Sound HPA602 Dual Channel 600W Commercial Amplifier
The Atlas Sound HPA602 Dual Channel Commercial Amplifier has been designed to be versatile for uses in both commercial 70V / 100V distributed systems and professional applications that require amplifiers to handle multiple impedance loads
-
Atlas Sound DPA404 4-Channel Power Amplifier 100W @ 70/100V or 4 x 75W @ 8 Ohm
The Atlas Sound DPA404 multi-channel power amplifier delivers four channels x 100W @ 70 or 100-volts or 4 x 75W @ 8-ohm. It is designed for multi-zone distributed audio systems used in live sound reinforcement and building/emergency communication systems.
-
Yamaha SWP1-8 Audio Network Switch
The Yamaha SWP1-8 network switch equipped with eight etherCON ports and two option slots.
-
Atlas Sound HPA1302 Dual Channel 1300W Commercial Amplifier
The Atlas Sound HPA1302 is a dual channel 1300W commercial amplifier designed for use in both commercial 70V/100V distributed systems and professional applications that require amplifiers to handle multiple impedance loads.
-
Atlas Sound DPA804 4-Channel Power Amplifier 200W @ 70/100V or 4 x 150W @ 8 Ohm
The Atlas Sound DPA804 multi-channel power amplifier delivers four channels x 200W @ 70 or 100-volts or 4 x 150W @ 8-ohm. It is designed for multi-zone distributed audio systems used in live sound reinforcement and building/emergency communication systems.
-
Atlas Sound DPA2402 2400W Networkable Multi-Channel Power Amplifier
The AtlasIED DPA2402 features a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-based DPA2402 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation.
-
Yamaha SWP1-8MMF Audio Network Switch
The Yamaha SWP1-8MMF network switch is equipped with eight etherCON ports, one opticalCON port, and one option slot.
-
Ashly Audio nXe 752 2 Channel Networkable Multi-Mode Amplifier
The nXe 752 networkable amplifier has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing.
-
Ashly Audio nXe 754 4 Channel Networkable Multi-Mode Amplifier
The nXe 754 networkable amplifier has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing.
-
Ashly Audio nXe 1504 4 Channel Networkable Multi-Mode Amplifier
The nXe 1504 networkable amplifier has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing.
-
Bose ControlSpace ESP-1240 Signal Processor (Discontinued)
The Bose® ControlSpace® ESP-1240 engineered sound processor is an open-architecture DSP with 12x4 fixed analog audio, built-in 8-channel ESPLink output and a rear-panel digital expansion slot offering IP-based network audio and control card options.