Search results for '%22anchor audio AN-135%2B%22'
-
Rolls RM424 Switchable Four Zone Mixer
The Rolls RM424 switchable four zone mixer combines two paging microphones with two line level source inputs. Each input is switch selected to output to any combination of four zone outputs. The outputs are all balanced XLR connectors, Remote Volume provides each zone with the means for external volume control.
List $419.00Price $339.00Savings $80.00 (19%) -
Stewart Audio CVA16-1-CV Single-Channel Dante Subcompact PoE+ Amplifier 16W x 1 @ 70V/100V
The Stewart Audio CVA16-1-CV PoE+ compact Dante amplifier is designed to be a single cable solution for smaller zones without the need for a local power outlet. This amplifier leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.
-
Stewart Audio CVA40-1-CV-D Single-Channel Dante Subcompact PoE++ Amplifier 40W x 1 @ 70V/100V
The Stewart Audio CVA40-1-CV-D PoE++ compact Dante amplifier is designed to be single cable solutions for small/medium zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.
-
Stewart Audio DSP100-2-LZ-D 2-Channel DSP Enabled Amplifier 2 x 100W @ 4/8 Ohms Dante Network Enabled
The Stewart Audio DSP100-2-LZ-D is an affordable, 2 channel, 4/8 Ohm, 1/2 rack amplifier delivering 100W per channel with built-in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-2-LZ-D supports Dante™ audio.
-
OWI MC4 Four-Channel Audio Control Mixer
The OWI MC4 will allow either line or mic level inputs on each channel. It has an additional four sets of level controls to provide a fixed secondary output not affected by any of the changes on the front panel level input controls.
-
Stewart Audio FLX-E-80-4-CV 4-Channel DSP Enabled Amplifier 4 x 80W @ 70/100V
The Stewart Audio FLX-E-80-4-CV is a 4 channel, 70V/100V, 1/2 rack amplifier delivering 80W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control.
-
Shure ANI22-XLR ANIUSB MATRIX USB Audio Network Interface
The Shure ANI22 Audio Network Interface provides 2 channels of Dante-to-analog and 2 channels of analog-to-Dante conversion. A single interface provides a simple way to connect analog equipment to the audio network, such as wireless microphones, audio processors, video codecs, and loudspeaker systems.
-
Shure ANI22-Block ANIUSB MATRIX USB Audio Network Interface
The Shure ANI22 Audio Network Interface provides 2 channels of Dante-to-analog and 2 channels of analog-to-Dante conversion. A single interface provides a simple way to connect analog equipment to the audio network, such as wireless microphones, audio processors, video codecs, and loudspeaker systems.
-
Stewart Audio FLX-E-160-2-CV-D 2-Channel DSP Enabled Amplifier 2 x 160W @ 70/100V Dante Network Enabled
The Stewart Audio FLX-E-160-2-CV-D is a 2 channel, 70V/100V, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-CV-D amplifier supports Dante™ audio.
-
Stewart Audio FLX-E-160-2-LZ-D 2-Channel DSP Enabled Amplifier 2 x 160W @ 4/8Ω Dante Network Enabled
The Stewart Audio FLX-E-160-2-LZ-D is a 2 channel, 4/8Ω, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-LZ-D amplifier supports Dante™ audio.
-
Stewart Audio FLX-E-320-1-CV-D Mono DSP Enabled Amplifier 1 x 320W @ 70/100V Dante Network Enabled
The Stewart Audio FLX-E-320-1-CV-D is a single channel, 70V/100V, 1/2 rack amplifier delivering 320W audio power with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control. The FLX-E-320-1-CV-D amplifier supports Dante™ audio.
-
Rolls RM67 Mic/Source Mixer
The Rolls RM67 mic/source mixer is a single rack space mixer designed for the install/contractor market. The unit mixes three balanced microphones with four stereo sources to mono or stereo balanced outputs. The XLR microphone inputs have Mic/Line level switches, a send/return Insert jack, and individually switchable +12 VDC phantom power.
List $339.00Price $269.00Savings $70.00 (21%) -
Stewart Audio DSP100-1-CV-D Mono DSP and Dante Network Enabled Amplifier
The Stewart Audio DSP100-1-CV-D is an affordable, single-channel, 70V/100V, 1/2 rack amplifier delivering 100W audio power, with built-in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-1-CV-D supports Dante audio.
-
TOA M-900MK2 8-Channel Mixer Preamplifier
The TOA M-900MK2 Mixer Pre-amplifier is engineered for high performance with wide frequency response, very low noise and distortion, and excellent output regulation.
-
TOA M-243 Stereo Mixer
M-243 from TOA Electronics is a single rack space six-channel stereo mixer. It features four stereo RCA inputs for sources such as CD players, tape players, or electronic instruments and two XLR microphone inputs with switchable high pass filters. -
Pure Resonance Audio MX8-PM Push-To-Talk Zone Paging Microphone
The Pure Resonance Audio MX8-PM is a compact 4-zone push-to-talk microphone, perfect for commercial paging. It pairs exclusively with the MX82 and MX84 mixers, offering easy multi-zone paging with features like a high-quality gooseneck condenser microphone, volume control, pre-announcement chime, and more. Ideal for businesses seeking top-notch sound quality for announcements.Free Shipping!List $215.99Price $179.99Savings $36.00 (17%) -
Ashly Audio TM-335 Public Address Mixer Amplifier 3-Input 35W
The Ashly TM-335 is a mixer and 35W mono power amplifier for applications that require public address, background music and/or paging.
List $349.00Price $299.00Savings $50.00 (14%) -
Allen & Heath GR4 Desktop and Rack Mount Installation Zone Audio Mixer
The Allen & Heath GR4 Installation Zone Mixer is a 1U rack-mounting or desktop audio mixer, that includes a mic input on the front panel, plus a 3.5 mm jack on the front for portable music sources.
-
Brewery Sound System with Background Music and Paging with 12 Bose FreeSpace FS Pendant Speakers and Bluetooth Wireless (Up to 6,000 SF)
This brewery sound system under $3,500 provides background to moderate foreground level audio with high-quality Bose pendant speakers and Pure Resonance Audio 120W Bluetooth/MP3 and AM/FM tuner, perfect for breweries, microbreweries, nano breweries or brewpubs up to 6,000 sq. ft.
-
Brewery Sound System with Background Music and Paging with 12 Bose FreeSpace Speakers and Bluetooth Wireless - Up to 6,000 SF (Discontinued)
This brewery sound system under $3,500 provides background to moderate foreground level audio sound system with high-quality Bose Speakers and Pure Resonance Audio 120W Bluetooth/MP3 and AM/FM tuner, perfect for breweries, microbreweries, nano breweries or brewpubs up to 6,000 sq. ft.
-
Pure Resonance Audio PTT1 Desktop Push-to-Talk Gooseneck Microphone (Open Box)
The Pure Resonance Audio PTT1 desktop push-to-talk microphone provides excellent performance and reliability, ideal for paging, announcements, general public address, and communication applications. The PTT1 features a uni-directional dynamic gooseneck microphone, table-stand, dual momentary locking switch, 5-foot cable, and three-pin male XLR connector. The durable gooseneck and metal table-stand ensure the PTT1 push-to-talk paging microphone can withstand even the toughest daily use in commercial environments.Free Shipping!List $105.99Regular Price: $89.99
Pro Acoustics Price $72.99
Savings $33.00 (31%) -
Rane Commercial RAD16z Remote Audio Device Dual I/O Euroblock AD Converter
The RAD16z is an alternative to standard switchboxes for impractical areas such as in stage floor pockets or above ceilings. Its form factor is a rugged metal box with flexible surface mounting options. The RAD16z is plenum-rated UL 2043.
List $349.99Price $349.00 -
SoundTube STNet Switch II 16-Port 40W PoE per Port Audio Quality Switch
The SoundTube STNet Switch II is designed for use with SoundTube STNet IPD speakers. It guarantees 40W of PoE power to all 16 ports simultaneously
-
Ashly Audio nXp3.02 2-Channel Network Power Amplifier 2 x 3000W @ 2 Ohms with Protea DSP
The Ashly nXp3.02 is a 2-channel rack mountable multi-mode amplifier capable of driving 2 ohm loads at full power. The nXp3.02 is designed to meet the most demanding live sound environments and fixed audio installations anywhere, performance venues, stadiums, arenas, convention centers as well as schools, storefronts, and worship spaces. The nXp is a Protea DSP amplifier that includes dynamics, gain, EQ, feedback suppression, FIR filters, matrix and auto-mixer, crossover, delay, and more.