Search results for 'dante'
-
Attero Tech unHX2D Dante/AES67 Networked HDMI Audio De-Embedder/Embedder Interface
The Attero Tech unHX2D is a Dante enabled HDMI de-embedder/embedder designed to bridge 2-channel PCM HDMI audio to/from a Dante/AES67 audio network. In addition, the unHX2D includes two line-level analog inputs and outputs that can be independently bridged to/from a Dante/AES67 audio network.
-
Attero Tech unDIO2X2+ 2x2 Channel Mic/Line I/O Dante Networked Audio Interface
The Attero Tech unDIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dante-based networked audio system. The small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.
-
Atlas Sound IED1544AIO-D 4 x 4 Analog/Dante I/O Module
The Atlas Sound IED1544AIO-D is a 4-input x 4-output mic/line-level analog pre-amplifier that converts analog audio signals to Dante® network audio. Multiple channels of Dante® network audio can be transported over standard IP networks.
List $979.99Price $785.99Savings $194.00 (20%) -
Shure ANI22-XLR ANIUSB MATRIX USB Audio Network Interface
The Shure ANI22 Audio Network Interface provides 2 channels of Dante-to-analog and 2 channels of analog-to-Dante conversion. A single interface provides a simple way to connect analog equipment to the audio network, such as wireless microphones, audio processors, video codecs, and loudspeaker systems.
-
Shure ANI22-Block ANIUSB MATRIX USB Audio Network Interface
The Shure ANI22 Audio Network Interface provides 2 channels of Dante-to-analog and 2 channels of analog-to-Dante conversion. A single interface provides a simple way to connect analog equipment to the audio network, such as wireless microphones, audio processors, video codecs, and loudspeaker systems.
-
Atlas Sound TSD-DAC2I 2-Channel Balance Line Input to Dante Interface
The Atlas Sound TSD-DAC2i is a PoE 2-channel analog pre-amplifier that converts analog audio signals into Dante® digital audio. The TSD-DAC2i can be used for any Analog to Dante® digital audio endpoint but is ideally suited to be used with the Atlas Sound WTSD wall mixer series.
List $503.99Price $404.99Savings $99.00 (20%) -
Bose ControlSpace ESP-1240AD Sound Processor with Dante Audio Networking (Discontinued)
The Bose ControlSpace ESP-1240AD engineered sound processor is an upgraded model that includes options for Dante audio networking and Bose AmpLink connectivity. -
Bose ControlSpace ESP-880AD Sound Processor with Dante Audio Networking (Discontinued)
The Bose ControlSpace ESP-880AD engineered sound processor is an upgraded model that includes options for Dante audio networking and Bose AmpLink connectivity. -
EAW RSX89 2 Way Self-Powered Loudspeaker 90° × 60°
The EAW RSX89 features onboard bi-amplified electronics (500W RMS/1000W peak) featuring signature EAW DSP including Focusing and DynO for pristine impulse response.
-
EAW RSX129 2 Way Self-Powered Loudspeaker 90° × 60°
The EAW RSX129 features onboard bi-amplified electronics (500W RMS/1000W peak) featuring signature EAW DSP including Focusing and DynO for pristine impulse response.
-
Atlas Sound BB-168AECDT 16 In x 8 Out - Networkable DSP Device with Acoustic Echo Cancellation
The BlueBridge BB-168AECDT networkable DSP devices with Acoustic Echo Cancellation and Dante is a powerful and flexible tool offering mission critical solutions to successfully satisfy your customers' teleconferencing and video conferencing needsList $7,206.99Price $5,767.99Savings $1,439.00 (20%) -
Bose ControlSpace ESP-4120 Signal Processor (Discontinued)
The Bose ControlSpace ESP-4120 sound processor is a single-rack-space DSP with an 4x12 analog audio configuration, built-in ESPLink output, an open digital expansion slot ready to accommodate optional Dante or AVB network audio cards. -
Stewart Audio DSP100-2-CV-D DSP Enabled Amplifier
The DSP100-2-CV-D is an affordable, 2 channel, 70V/100V, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. The DSP100-2-CV-D supports Dante™ audio.
-
Bose ControlSpace ESP-880 Signal Processor (Discontinued)
The Bose ControlSpace ESP-880 sound processor is a single-rack-space DSP with an 8x8 analog audio configuration, built-in ESPLink output, an open digital expansion slot ready to accommodate optional Dante or AVB network audio cards.
-
Williams Sound WF T5 D WaveCAST Assistive Listening System Interface with Dante
The Williams Sound WaveCAST with Dante is a Wi-Fi platform designed for pro-audio applications where high-quality sound is required. It is built on a hardware-based DSP audio system architecture, allowing system optimization to achieve the highest quality experience for the particular audio stream being delivered.
-
RCF XPS 16KD 4 x 4000W Dante-Equipped DSP Power Amplifier
The RCF XPS 16KD is a four-channel power amplifier with advanced processing and advanced routing with Dante, digital and analog I/O for both touring and install use. With 4x4000W Class D continuous power at 2.7 ohms, 40-bit floating-point processing at 96 kHz, and 32-bit internal routing, XPS 16K packs extreme power density in a 2U chassis. -
Attero Tech Axon D2FLEXio Dual Analog Flex I/O Dante/AES67 Interface
The Attero Tech D2FLEXio provides cost-effective analog audio connectivity for installed AV systems. The small, unobtrusive form factor provides easy installation - anywhere.
-
EAW RADIUS RSX Line Array Package
Customizable EAW RADIUS Line Array packages. Optimal sonic performance has never been easier or more accessible, and system design and control has never been more approachable.
-
Stewart Audio DSP100-1-CV-D Mono DSP and Dante Network Enabled Amplifier
The Stewart Audio DSP100-1-CV-D is an affordable, single-channel, 70V/100V, 1/2 rack amplifier delivering 100W audio power, with built-in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-1-CV-D supports Dante audio.
-
Atlas Sound IED1544ZOP 4x4 Smart Zone Output Processor
The Atlas Sound IED1544ZOP 4x4 Smart Zone Output Processor provides all the network audio routing and zone digital signal processing functions of a DNA2404D integrated network amplifier unit. This includes Dante™ network audio input, equalization, level control, and IED's patented AlwaysHEARTM smart ambient analysis automatic level adjustment.
List $3,556.99Price $2,847.99Savings $709.00 (20%) -
Stewart Audio FLX-E-160-2-CV-D 2-Channel DSP Enabled Amplifier 2 x 160W @ 70/100V Dante Network Enabled
The Stewart Audio FLX-E-160-2-CV-D is a 2 channel, 70V/100V, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-CV-D amplifier supports Dante™ audio.
-
Stewart Audio FLX-E-160-2-LZ-D 2-Channel DSP Enabled Amplifier 2 x 160W @ 4/8Ω Dante Network Enabled
The Stewart Audio FLX-E-160-2-LZ-D is a 2 channel, 4/8Ω, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-LZ-D amplifier supports Dante™ audio.
-
Stewart Audio FLX-E-320-1-CV-D Mono DSP Enabled Amplifier 1 x 320W @ 70/100V Dante Network Enabled
The Stewart Audio FLX-E-320-1-CV-D is a single channel, 70V/100V, 1/2 rack amplifier delivering 320W audio power with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control. The FLX-E-320-1-CV-D amplifier supports Dante™ audio.
-
Community ALC-404D 4-Channel x 400W Amplified Loudspeaker Controller with DSP and Dante
Community's line of Amplified Loudspeaker Controllers (ALC) offers factory-optimized DSP processing, protective limiting and amplification, as well as signal routing, zone switching, and remote monitoring for virtually any Community loudspeaker application.