Clockaudio C008EG-RF Desk / Table Mount Low Profile Half-Cardioid Boundary Layer Condenser Microphone - Gray

The condenser microphone is a boundary layer design with a half-cardioid polar pattern. The microphone is made of solid brass and capable of being mounted permanently with 2 set screws and includes a 10 ft (3 meters) cable terminated with a male 3 pin XLR plug. The microphone includes an integrated Phantom Power Module that will accept 9 to 48 volts DC. Phantom Power Module also includes filters which will eliminate all GSM frequencies from 800-1200 MHz. Frequency response 50 Hz to 18 KHz; Sensitivity -37.0dB +/- 3dB @ 1KHz (0dB =1V/Pa), Impedance 200 Ohms. Total Harmonic Distortion (THD) at an operating level of 125db is no greater than 1%. The microphone also includes rubber isolators to minimize the transfer of mechanical noise from the table. Finish: Grey Nextel.