Commercial Sound Equipment

The Atlas Sound TSD-DAC2i is a PoE 2-channel analog pre-amplifier that converts analog audio signals into Dante® digital audio. The TSD-DAC2i can be used for any Analog to Dante® digital audio endpoint but is ideally suited to be used with the Atlas Sound WTSD wall mixer series.

The Audio-Technica ATND971a has bridged the gap between audio and IT with the first wired microphone that transmits audio and controls data together over the Dante network protocol. A simple Ethernet connection allows the network microphone to communicate across an existing network of Dante-enabled devices and, with the mic's integrated, programmable user switch, control any of those devices at the push of a button.

Shure Stem Speaker's innovative design gives you the option to mount the device on the ceiling, wall, or table for ultimate flexibility. With it's powerful driver and built-in technology, Stem Speaker delivers an exceptional sound experience in any meeting room. As an ecosystem device you can mix and match devices until your room is customized to meet your needs.

The Attero Tech unDIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dante-based networked audio system. The small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.

The Atlas Sound IED1544AIO-D is a 4-input x 4-output mic/line-level analog pre-amplifier that converts analog audio signals to Dante® network audio. Multiple channels of Dante® network audio can be transported over standard IP networks.

The Atlas Sound IPS-SIS indoor wall mount SIP strobe leverages the VoIP communication solution to enhance critical alert messages with visible signaling in environments that require visual notification to overcome high ambient noise levels or large spaces.

The AtlasIED IPX Series IP-DM is an indoor wall mount IP LED display with an integrated talkback microphone. It leverages VoIP communication solutions to extend notifications with effective visual text alerts for high ambient noise areas or large spaces.

The AtlasIED IPX Series IP-HVP is a vandal-proof, weather-resistant, wall mount IP speaker. It leverages VoIP communication to extend telepresence with enhanced audio for environments where network-wide communication is desired and high-output speakers are required to overcome high ambient noise and/or large spaces.

The Biamp Tesira AMP-450BP is a 4-channel PoE+ conferencing amplifier. Capable of mounting directly to the back of the speaker, this amplifier greatly reduces cost by minimizing the cabling between the ceiling devices and the rack room.

The AtlasIED IPX Series IP-SDH indoor wall mount IP speaker with horn and display leverage the VoIP Communication solution to extend telepresence with enhanced audio for those environments where network-wide communication is desired and that require large speakers with high output to overcome high ambient noise areas or large spaces.

AtlasIED IPX Series IP-SDM indoor wall mount IP speaker with an LCD display and talkback leverage the VoIP Communication solution to extend telepresence with enhanced audio for those environments where network-wide communication is desired and that require large speakers with high output to overcome high ambient noise areas or large spaces.

The AtasIED IPCSD1 is a push-to-talk switch only digital microphone station designed to work within a GLOBALCOM®.IP system. It is a network appliance with a unique IP address that requires no configuration. It uses a single Ethernet interface for audio and control data.

The AtlasIED IPX Series IP-DD is an indoor dual-sided LCD that can display time as well as scrolling text and leverages the VoIP communication solution to extend notifications with effective visual text alerts for high ambient noise areas or large spaces.

Shure Control's intuitive design prevents unnecessary learning curves often associated with new technology adoption, and creates an enjoyable and familiar experience for everyone.

The Attero Tech unHX2D is a Dante enabled HDMI de-embedder/embedder designed to bridge 2-channel PCM HDMI audio to/from a Dante/AES67 audio network. In addition, the unHX2D includes two line-level analog inputs and outputs that can be independently bridged to/from a Dante/AES67 audio network.

The AtlasIED IPCSD4 digital microphone station is a 4-button device for initiating audio/visual announcements, messages, and pages with the GLOBALCOM®.IP IP108-D or IP116-D Announcement Control Systems. The IPCSD4 uses a single Ethernet interface for audio and control data.

The Atlas Sound IED1522AIOLR 2x2 CobraNet Audio I/O Module is a CobraNet interface for use in the professionally installed sound market. The IED1522AIOLR receives CobraNet network audio and sends them to two balanced analog audio outputs while simultaneously inputting two channels of mic/line level balanced audio and transmitting them as CobraNet network audio.

Shure Stem Ceiling's innovative design gives you the option to discreetly low profile mount the device to a ceiling tile or tie it into the design of the room with chandelier mode. With 100 microphones and three array options (wide, medium, and narrow) and an audio fencing feature, Ceiling focuses on who's speaking and allows you to focus on your meeting all while keeping the technology out of sight. Need more coverage? Mix and match all Stem devices until your room's completely covered.

The Atlas IED550CS-H digital communications station is a fully programmable touch screen user interface device for initiating audio/visual announcements with GLOBALCOM Announcement Control Systems. Each model utilizes an electret condenser cartridge that is positioned in the housing such that its frequency response is enhanced.

The Atlas IPCSDTOUCH-G digital communications station is a fully programmable touch screen user interface device for initiating audio/visual announcements with GLOBALCOM Announcement Control Systems.

The Atlas Sound IPCSDTOUCH-H digital communications station is a fully programmable touch screen user interface device for initiating audio/visual announcements with GLOBALCOM Announcement Control Systems.