- Description
Details
Atlas Sound IP-DD POE+Dual Sided IP Compliant LCD Endpoint with Speakers
The AtlasIED IPX Series IP-DD is an indoor dual-sided LCD that can display time as well as scrolling text and leverages the VoIP communication solution to extend notifications with effective visual text alerts for high ambient noise areas or large spaces.
AtlasIED IP-DD registers as a communication endpoint directly within InformaCast, SA-Announce, and GCK advanced notification applications, supporting both visual text and audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded, scheduled announcements and intercom while leveraging the WAN/LAN network architecture.
When used within a Cisco Environment, these same IP dual-sided LED displays with speakers from AtlasIED can join Cisco's Unified Survivable Remote Site Telephony (SRST) as a supported device within SRST endpoint Architecture. Cisco's SRST provides remote location call-processing redundancy when access to the centralized Cisco Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination of phones and speakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).
The IP-DD can provide audio via its integrated speakers or to support distributed analog public address systems with the convenience of line-level audio outputs. This line-level output is ideal for use with AtlasIED AA, PA, DPA, or CP series amplifiers to power large zones of traditional 25V, 70.7V, or 100V AtlasIED speakers or paging horn speakers.
It also includes 2 GPI inputs, 1 GPI output, and microphone input for talkback or listen applications. The GPI/O ports offer triggering for critical alert notification or unified connectivity of third party systems.
- Features
Features
- Network controlled, high visibility LCD display
- Auto registration and auto provisioning
- Multicast enabled network clock control
- Cisco SRST compliant
- Power using IEEE802.3af compliant PoE+ switch or local 12VDC-18VDC PSU
- RJ-45 female input on PCB
- Specification
System Type IP Dual Sided LCD Display With or Without Speakers Indicators Network Status (On Back) Max SPL at 1m (Passive) 93dB SPL Continuous
96dB SPL PeakAmplification Type Single-Channel Class D Topology AC Power Input PoE+ and External 24VDC (Recommend TSD-PS24V2500MA) Power Rating (RMS) 12 Watts Max (802.3af)
25 Watts Max (802.3at)THD <0.2% Cooling Passive / Convection Driver Protection Built-In Limiter Audio Inputs and Outputs Input: Analog Audio Type(s) One Balanced Analog Input: Analog Connectivity Secured Screw Terminal Block Input: Network Audio Type(s) G.711 U-Law
A-Law and G.722 CapableInput: Network Connectivity RJ-45 Female Output: Analog Audio Type(s) One Balanced Line Level Output: Analog Connectivity Secured Screw Terminal Block Output: Digital Audio Type(s) G.711 U-Law
A-Law and G.722 Capable (Multicast)Output: Speaker Level 8Ω, 12W (802.3AF), 25W (802.3AT) Output: Speaker Connectivity Two x Secured Screw Terminal Block Display Display Type High Resolution Back-Lit Color LCD Display Color Range Backlit Display - Red, Blue, Green - (With GCK)
Standard - Blue
Text - WhiteSurface Lumens 1900 cd/m^2 Minimum, All White Pixels Character Max Height 480 Pixels Viewable Dimensions (H x W) 8.66" (221 mm) x 2.23" (57 mm) Control Time via NTP - Text Controlled via Software Flasher Flasher Type LED Flash Color Range RGB Flasher Lumens 83 Red, 545 Green, 90 Blue, 570 White Flash Rate(s) Multi Speed Capable Viewable Dimensions (H x W) 0.5" (13 mm) x 3.5" (89 mm) Control Controlled via Software Network Ethernet IEEE 802.3 10/100Base-T PoE IEEE 802.3 AF/AT Compliant VLAN IEEE 802.1q Tagging Protocols IP Addressing DHCP / Static Auto-Provisioning HTTP / TFTP Auto-Registration HTTP / Service Location Protocol / IEDNet Time NTP Telephony SIP Enclosure Color White Mounting / Rigging Provisions Mounting Plate Provided with Various Hole Patterns for Wall or Ceiling Mount Safety Agency Ratings ETL Listed to Comply with 62368-1, CSA C22.2 #62368-1, IEC 62368-1 CB Scheme and FCC Logo One Color Print Dimensions (H x W x D) 9.9" (251 mm) x 19.94" (506.5 mm) x 7" (177 mm) Shipping Weight 16.11 lbs (7.3 kg) - Documents
Documents
- Reviews
Write Your Own Review