Commercial Sound Equipment

The Lowell CS650-DW program selector switch with volume control is a combination volume control / selector switch for controlling the speaker volume on up to six source connections.

The Lowell LT-810-72-BB 1x2 Lay In-Ceiling Tile Speaker is a quick-install loudspeaker for suspended tile ceilings features an 8" dual cone driver with dual voltage transformer and 1x2 fine perforation grille with sub plate.

The Astatic 119S-19 is a dynamic cardioid microphone with a momentary push button switch, designed especially for gooseneck mounting in quality sound reinforcement and communication installations.

The Yamaha DCP4S Wall Control Panel is used for the MTX Series and can be used with up to 8 controllers per 1MTX with CAT5 cable.

The TOA T-01S Balanced Line Output is for transformer-isolated output of mixing bus signal to feed other mixers, amps, and tape recorders. Includes balanced line output with removable terminal block and gain control.

The JBL SLP12/T full-range on-wall loudspeaker provides superior sound and broad, consistent coverage in a sleek, low-profile enclosure, with a powerful 75 mm (3") driver that delivers the legendary sound that JBL is known for.

The JBL SLP12/T full-range on-wall loudspeaker provides superior sound and broad, consistent coverage in a sleek, low-profile enclosure, with a powerful 75 mm 3" driver that delivers the legendary sound that JBL is known for.

The Lowell 200LVC-RMDB Decora rackmount volume control is a 200-watt rackmount assembly with a decora-style subplate. It is designed for installation into Lowell’s LD8- RMP or LD9-RMP rackmount device panels with pre-punched decora-style cutouts.

The Bogen KFLDS30T is a wide dispersion, high-intelligibility, reentrant-type horn loudspeaker designed for applications where wide angle projection and directivity is a necessity.

The Lowell SM810A UL Listed SM series sound masking speaker, which consists of a speaker 8”dual cone, transformer, steel enclosure with grille, and choice of mounting hardware.

The Atlas Sound AWV4 4RU Wall Mount System is a cost effective wall mount system which allows low profile mounting of Ethernet switches, Mixer Amplifiers or other rack mount electronics. This bracket style hardware kit offers 4RU mounting configuration and creates flush mounting options for equipment.

The AtlasIED WTSD-XLR4 is a wall plate featuring four female XLR connectors. The WTSD-XLR4 is designed to be used in installations featuring the WTSD-MIX41K wall plate mixer.

The Atlas Sound AS-140-592 is a 17-inch deep sturdy shelf with wire access that provides for convenient wall-mounting of amplifiers or electronic equipment.

The RDL ST-PA6 represents the second generation of RDLs® breakthrough in the traditional power vs. size ratio. Present technology permits features and performance at the most economical cost ever. The ST-PA6 offers 6 Watts of power for a price you would expect to pay for 3 Watts.

The Atlas Sound AP-15 environment-resistant loudspeaker is the world standard for high-intelligibility voice and signal transmission. The 8-ohm Model AP-15 is a double re-entrant loudspeakers which deliver 15-watts of continuous power handling, superior intelligibility and unparalleled efficiency.