Commercial Sound Equipment

The Bogen Communications C100 is a public address mixer amplifier that provides mixing of microphones, telephone, and auxiliary sources. Output screw terminals are provided for 4-ohm, 16-ohm, 25V and 70V (transformer-coupled) speaker systems. Output jacks let you connect to a tape recorder or an additional booster amplifier, or feed a 600-ohm telephone line when an accessory transformer (Model WMT1A) is used.

Bogen's V60 Power Vector Modular Amplifier offers 60 Watts of power and is designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status.

Speco Technologies’ UL listed Contractor Series amplifiers can stand on their own to run a smaller installation, or be incorporated into a much larger job. With RMS power ranging from 30W to 120W, microphone and source-mixing ability.

Bogen's V100 Power Vector Modular Amplifier offers 100 Watts of power and is designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. It also includes a motorized master volume control that can be controlled using a remote volume control panel.

The TOA BG-2060 5-channel mixer amplifier is a total redesign of the highly successful BG-1000 Series and not just for design's sake. It features a newly-engineered chassis, designed to not only look better but perform better and most of all-install easier.

The Bogen Communications TPU100B is a wall-mounted telephone paging amplifier rated at 100W and can also be rack-mounted. The TPU amplifiers permit paging from telephone and/or microphone, music input through an RCA jack or screw terminals, and voice-activated, variable level, music mute with fade back after page.

Bogen's V150 Power Vector Modular Amplifier offers 150 Watts of power and is designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. The model includes eight module bays for plug-in input modules and allows up to four levels of priority between modules.

The Bosch PLE-1MA120 Plena Mixer Amplifier comes in 120W output power option. This power is directly available on 25 / 70V constant voltage connections and on a low impedance connection for a 4 ohm load.

The TOA BG-2120 5-channel mixer amplifier is a total redesign of the highly successful BG-1000 Series and not just for design's sake.

The Lowell MA60 5 Channel Mixer Amplifier includes five channel volume controls, treble and bass controls, master volume control, main power switch, and LED display bank for output level.

Bogen's V250 Power Vector Modular Amplifier offers 250 Watts of power and is designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. The model includes eight module bays for plug-in input modules and allows up to four levels of priority between modules.

The Ashly nX 752 Multi-Mode Power Amplifier is designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.

The TRA-2075 power amplifier is an advanced, efficient 2-channel amplifier featuring 75W at 4 ohm. Perfect for Low Impedance, 70V or 100V installations with modest power requirements, they also feature a switch-mode power supply with Class-D circuitry, providing an extremely power-efficient solution.

The Ashly nX 1502 Multi-Mode Power Amplifier is designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.

The Bogen Communications TPU250 is a wall-mounted telephone paging amplifier rated at 250 watts, that can also be rack-mounted. This TPU amplifier permits paging from telephone and/or microphone; music input through an RCA jack or screw terminals; and voice-activated, variable level, music mute with fade back after page.

The TRA-2150 power amplifier is an advanced, efficient 2-channel amplifier featuring 150W at 4 ohm Perfect for Low Impedance, 25V, 70V or 100V installations with modest power requirements, they also feature a switch-mode power supply with Class-D circuitry, providing an extremely power-efficient solution.

The Ashly nX 754 Multi-Mode Power Amplifier is designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.

The Ashly nX 1504 Multi-Mode Power Amplifier is designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.

The nXe 752 networkable amplifier has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing.

The Ashly TRA-4075 power amplifier is a 4-channel 2 rack space amplifier that is perfect for low impedance, 25V, 70V or 100V installations with modest power requirements. All TRA Series amplifiers are convection-cooled, so there’s little maintenance after the installation, and no annoying fan noise.

The Speco Technologies PBM120A is a 120W 5-Zone Amplifier with paging capabilites and includes IR Remote control, an RS232 input for integration with control systems, front panel locking capability, and rack-mounting kit.