- Description
Details
The NX-300 uses an advanced implementation of its Packet Audio™ streaming technology (same as NX-100) with improved broadcast capacity and system expandability, WAV file record functions and addition of other advanced features. The NX-300 can be used to create wide area PA and announcement systems over any IP network. Ideal for railway systems, airports, regional business broadcasts, Bank ATMs, parking system communications and industrial facilities.
- Features
Features
- Transmits16 bit audio w/sample rates up 48kHz for better than CD audio quality
- Up to 500 NX-300s can be connected to each other via LAN or WAN
- Up to 1,000 links can be established and broadcast patterns
- Up to 64 NX-300s can be programmed for use over extremely wide areas
- High or low broadcast priority can b set to allow for paging override with alert tones, or announcements
- Broadcast patterns may be activated via contact closures or via the on-screen GUI
- Dual-channel capable of one-way stereo signal paths or bi-directional (full-duplex) dual mono signals
- Transformer balanced ins & outs to accommodate virtually any mic or line level signal
- A built-in WAV-file recorder allows record/playback of up to 8 messages each up to 2-minutes in length
- The rear panel features a complement of 8 contact inputs and outputs
- Adjustable output volume of a broadcast based on a programmed scheduler
- System configuration, control and monitoring via the supplied GUI software and also via web browser
- Specification
Power Source Supplied from an external 24 V DC (21.6 − 26.4 V) power supply or AC adapter AD-246 (option) or the equivalent Power/Current Consumption 10W (AC operation), 310 mA (DC operation) Audio Input 2 channels, balanced (transformer isolated)/unbalanced changeable,2 kΩ, LINE/MIC changeable, volume adjustable Rated input: −20 dB*1 (LINE)/−60 dB (MIC) PAD function (–16 dB ), removable terminal block (6 pins) Audio Output 2 channels, balanced (transformer isolated), 600 Ω or less Rated output: 0 dB (unbalanced input)/–2 dB (balanced input), removable terminal block (6 pins) Frequency Response 50 Hz – 18 kHz (48 kHz sampling frequency, PCM, 0 to –6 dB deviation referred to 1 kHz) Distortion 0.2% or less (1 kHz, LINE signal level, 48 kHz sampling frequency, PCM, BPF) Signal to Noise Ratio 73 dB or more (LINE signal level, at rated output) Separation 70 dB or more (1 kHz, LINE signal level, BPF) Audio Format WAV file Number of Storable Audio Files Max. 8 Storable Time of Audio File Max. 2 min. per audio file (16 kHz sampling frequency, Sub-band-ADPCM, monaural operation) Control Input 8 channels, no-voltage make contact input, open voltage: 24 V DC, short-circuit current: 2 mA or less, removable terminal block (9 pins) (Only Channel 8 equipped with failure detection.) Control Input Failure Detection Section Connection resistance to make the function inactive: 20 kΩ ±5% Connection resistance to make the function active: 10 kΩ ±5% Connector cable: Twisted pair cable (Shielded type is recommended.) Maximum cable distance: 10 m Control Output 8 channels, open collector output (polarized), withstand voltage: 30 V DC, control current: 50 mA max., removable terminal block (9 pins) 2 channels, relay output (non-polar), withstand voltage: 30 V DC, control current: 500 mA max., removable terminal block (4 pins) Network Section Network I/F: 10BASE-T/100BASE-TX, Full-duplex/Half-duplex, Auto-negotiation
Network protocol: TCP, UDP, ARP, HTTP, RTP, IGMP, FTP, NTP
Audio packet transmission system: Unicast (Up to 16 simultaneous transmissions), Multicast (Up to 64 simultaneous transmissions) Connector: RJ45 connector
Voice sampling frequency: 8 kHz, 16 kHz, 32 kHz, 48 kHz (controllable on the software)
Quantifying bit number: 16 bits
Voice encoding method: PCM, Sub-band ADPCM (controllable on the software)Operation 2 channels, Audio input level control (Convertible to Audio output level control) Indicator 2 channels, audio input, SIGNAL (green)/PEAK (red), 2 channels, audio output, SIGNAL (green) LNK/ACT (green), BUSY (green), STATUS (green), ERROR (yellow), RUN (green) Setting Switch Reset, grand lift changeable, audio input 2 channels PAD changeable, audio input 2 channels LINE/MIC changeable SD Section For log storage (Max. 10000)
Media: SD/SDHC card (Max. 32 GB)
File system: FAT16, FAT32
• Use only SD memory cards rated at 100mA current consumption or less
• No SD card providedInstallation Method Rack, Desk, Surface mount Operating Temperature −10 to 50 °C (14 to 122 °F) (0 to 40 °C, or 32 to 104 °F, when AC adapter is in use) Operating Humidity 90% RH or less (no condensation) Finish Pre-coated steel plate, black, 30% gloss Dimensions (H x W x D) 1.74" (44.3 mm) x 8.27" (210 mm) x 10.16" (258 mm) Weight 3.75 lbs (1.7 kg) - Documents
- Videos
Videos
- Reviews
Write Your Own Review