- Description
Details
TOA NX-100 SERIES NETWORK AUDIO is a reliable and easy to use solution for transporting mic or line-level audio signals over IP-based local and wide area networks (LAN/WAN), as well as the Internet. Applications include wide area paging, background music or messaging audio distribution for airports, convention centers, railway stations and transit systems.
The flagship model NX-100PS US transports variable bandwidth, bi-directional audio, up to 14 kHz, as well as serial RS-232 and contact closure data. Each half-rack sized unit includes a balanced mic/line input and output and a 10/100 BaseT Ethernet jack for connection to standard network hardware. The rear panel includes eight programmable trigger inputs to initiate and terminate audio transmissions, eight programmable open collector control outputs and an RS-232 serial port for data transmission/reception.
NX-100PS US also has a built-in web server to support browser-based programming, control and monitoring from any network-connected PC. Other features include multiple error correction modes, external 24 VDC input, and Flash-upgradeable firmware.
- Features
Features
- IP-addressable Audio Codec converts analog audio (mic or line) to standard IP-based format for transmission over existing local or wide area networks (LAN/WAN) including the Internet
- Bi-directional audio transport
- Contact closure transport
- Serial RS-232 data transport (NX-100 only)
- Reduces installation and operational costs when distributing audio signals to remote locations
- Balanced mic/line input with adjustable volume control
- Phantom power (NX-100S only)
- Balanced line output
- Built-in Ethernet port (10/100BaseT)
- Point-to-point transmission (Unicast) of audio signals to up to four locations
- Simultaneous transmission (Multicast) of audio signals to up to 64 locations
- Control inputs can initiate and terminate audio transmissions without the need for dedicated PC-based or other control equipment
- Eight control inputs with adjustable contact off delay time
- Eight control outputs: open collector output
- Adjustable sample rateand audio bandwidth allows efficient use of network resources
- Minimum delay: 20 ms
- Multiple error correction modes
- Intuitive Configuration, Operating and Management software
- Browser-based software allows control and monitoring from any network-based PC
- Convenient End User features including customizable Operation software, Operation logs and password protection
- Front panel indication: Link/Active, Full-Duplex/Collision, Status, Error, Run
- Signal and Peak Indication (NX-100S only)
- Front panel Reset button
- External 24 VDC input for battery backup operation (NX-100 only)
- Easy to upgrade Flash Memory firmware
- Compact, half-rack size unit (1 RU)
- Requires AC power supply, model AD-246
- Optional rack-mount kits:
- MB-15B-BK (1 NX-100 or NX-100S)
- MB-15B-J (2 NX-100 or NX-100S)
- Five year warranty
- Specification
Power Source 24V DC (plug-in screw connector) or AC adapter AD-246 (optional) or the equivalent Current Consumption 200mA (DC operation) Audio Input 1 Channel (transformer-isolated), –58dB to 0dB balanced (MIC/LINE changeable, volume adjustable with volume control) 2kΩ, plug-in screw connector Audio Output 1 Channel (transformer-isolated), balanced, 600Ω, plug-in screw connector Frequency Response 50 – 14,000Hz (when sampling frequency is 32kHz) Distortion Under 0.3% (1kHz, when sampling frequency is 32kHz) Control Input 8 Channels, no-voltage make contact input, open voltage: 12V DC Short-circuit current: 10mA, plug-in screw connector Control Output 8 Channels, open collector output, withstand voltage: 30V DC Control current: 50mA max., plug-in screw connector Network I/F 10BASE-T/100BASE-TX, Auto-Negotiation Network Protocol TCP/IP, UDP, HTTP, RTP Audio Packet Transmission System Unicast (up to 4 simultaneous transmissions) Multicast (up to 64 simultaneous transmissions) Operating Temperature 0°C to +50°C (0°C to +40°C when AC adapter is in use) Operating Humidity Under 90% RH (no dew condensation should be produced) Finish Steel plate, black, 30% gloss Accessory Bracket mounting screw × 8 CD (PC setting/operation software programe) × 1 Power supply screw connector plug × 1 Audio I/O screw connector plug × 2 Control I/O screw connector plug × 2 RS-232C connector cover × 1 Optional Components Rack mounting bracket: MB-15B-BK (for rack mounting one NX-100 unit) MB-15B-J (for rack mounting two NX-100 units) AC adapter: AD-246 Dimensions (H x W x D) 1.81" (46 mm) x 8.27" (210 mm) x 7.4" (188 mm) Weight 2.6 lbs (1.2 kg) - Documents
- Reviews
Write Your Own Review