- Description
Details
The EVID-C4.2LP loudspeaker system is a complete two-way ceiling loudspeaker in a very low profile package. The package consists of a bezel assembly, grille, rear enclosure, 4-inch coax two-way loudspeaker and internal line-matching transformer.
The loudspeaker features a waveguide coupled titanium coated dome tweeter. The EVID-C4.2LP loudspeaker utilizes a 2nd order crossover network at 2.5 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels. The EVID-C4.2LP utilizes a transformer that offers a selection of 1.88 (70-V only), 3.75, 7.5 or 15 watts delivered to the loudspeaker system using either 70-V or 100-V lines, or 8 ohm bypass. Selection is via a convenient switch on the front baffle. The perforated grille is finished in semigloss white powder-coated enamel. The baffle and bezel are constructed from UL 94V-0 rated ABS. The rear enclosure is constructed from zinc-plated, heavy gauge steel. The low profile enclosure makes it easy to mount in very tight spaces. A side cover provides access to a 4-pin terminal block that allows direct connection to the speaker with 12 gauge wire and provides pass through to additional speakers. A tile bridge is included for safe suspension of the EVIDC4.2LP ceiling systems in a drop ceiling that uses mineral wool, or other fiber-based ceiling tiles. The EVID line of ceiling speakers has been designed to work together as a complete system in a wide range of different ceiling constructions. They provide wide dispersion, high-efficiency, high-maximum output, ease of installation, and wide-range reproduction of music or voice.
- Features
Features
- Low profile 4" coaxial two-way (3.7" deep)
- Full bandwidth overload protection
- Front baffle wattage tap adjustment
- Includes tile bridge and mounting ring for easy installation
- UL1480A and CSA 22.2 205 certified
- Specification
Frequency Response (-10 dB) 60 Hz - 20 kHz Sensitivity (SPL 1 W/1 m) 86 dB Coverage Pattern 130° conical Power Handling (@ 8Ω) 50W (with overload protection) Rated Impedance 8 Ω Input Configuration 8Ω, 70V/100V 70V/100V Power Taps 1.8 (70V only) / 3.7 / 7.5 / 15 / 30W LF Transducer 4" (100 mm) high-compliance driver (weatherized cone) HF Transducer 0.75" (19 mm) Ti-coated dome Mounting Systems Integrated 4-point toggle anchors Acoustic Design Ported cabinet, two-way design, internally damped, w/passive crossover Cabinet Construction Steel enclosure and UL94V-0 rated baffle and bezel Grille Construction Powder-coated steel Color White (paintable) Safety Agency Ratings UL 1480 Safe for use in air handling spaces per UL 2043 Dimensions (D x Dia) 3.7" (94 mm) x 11.8" (300 mm) Weight 7.35 lbs (3.32 kg) - Documents
Documents
- In The Box
In The Box
- (2) Speaker Systems
- (2) Grilles
- (2) C-Ring Supports
- (4) Tile Rails
- (4) Support Ring Screws
- (2) Terminal Connectors
- (1) Cutout Template
- (1) Owner’s Manual Paint Shields
- (1) Service Center Card
- (1) Owner’s Manual
- Reviews
Write Your Own Review