The Electro-Voice EVID C10.1 subwoofer system is a complete low-frequency ceiling subwoofer package. The EVID C10.1 is designed to augment the low-frequency response of any EVID ceiling speaker. The package consists of a bezel assembly, grille, rear enclosure, 10" subwoofer and internal line-matching transformer.
The EVID C10.1 subwoofer utilizes a 2nd order crossover network to provide the correct bandpass frequency response for use with any EVID Ceiling loudspeaker. The C10.1 utilizes a transformer that offers a selection of 7.5 (70 V only), 15, 30 or 60 watts delivered to the subwoofer system using either 70 V or 100 V lines, or 8-ohm bypass. Selection is via a convenient switch on the front baffle. The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel are constructed from UL 94V-0 rated ABS. The rear enclosure is constructed from zinc-plated, heavy gauge steel. The rear enclosure, with fiberglass damping material, provides an optimum internal volume or extended low-frequency performance. A rear cover, with provisions for a junction box fitting, provides access to a 4-pin terminal block that allows direct connection to the speaker with 12 gauge wire and provides full-range pass through to additional speakers. A tile bridge is included for safe suspension of the C10.1 ceiling systems in a drop ceiling that uses mineral wool, or other fiber-based ceiling tiles.
The EVID line of ceiling speakers has been designed to work together as a complete system in a wide range of different ceiling constructions. They provide wide dispersion, high-efficiency, high-maximum output, ease of installation, and wide-range reproduction of music.
| Frequency Response (-10dB) | 45Hz-180Hz |
|---|---|
| Coverage (Conical) | 180° |
| Power Handling | 150 W Cont./600 W Peak |
| Sensitivity (SPL 1W/1m) | 94 dB |
| Max Calculated SPL | 114 dB Cont. / 120 dB Peak |
| Impedance | 8 Ohms nominal (transformer bypass) |
| Network | 12 dB/oct |
| Transformer Taps | (7.5 - 70 V only), 15, 30, 60 |
| Connectors | Phoenix type removable w/ screw terminal & "loop-thru", 12-gauge wire |
| Grille | Perforated powder coated steel with safety tether |
| Support Hardware | Tile bridge, backing plate support, cutout template, paint shield |
| Input Formats | 8 Ω, 70 V, 100 V |
| LF Transducer | 10" (200 mm) |
| Cutout Size | 12.75" (324 mm) |
| Chassis Size | 10" (254 mm) |
| Diameter (Max) | 12.6" (320 mm) |
| Height | 11.93" (303 mm) |
| Weight Net | 15.43 lbs (7 kg) |
| Shipping Weight (pair) | 34.0 lbs (15.5 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
