- Description
Details
QSC AD-C6T AcousticDesign 6.5" 2-Way In-Ceiling Foreground Background Loudspeaker 70/100V with 16Ω Bypass
The QSC AcousticDesign AD-C6T is a 6.5" two-way ceiling loudspeaker ideally suited for a wide variety of foreground and background sound reinforcement applications which utilize 70/100V or 16Ω bypass configurations. The AcousticDesign series offers integrators a premium quality installed sound solution where performance, consistent coverage, and aesthetics are paramount. Specifically designed to maintain a consistent tonal characteristic across the entire family in ceiling, surface, and pendant applications, the Acoustic Design series allows integrators seamless transitions within blended installations.
The AD-C6T features a high quality 6.5" weather treated paper cone woofer with a 1" voice coil and a .75" aluminum dome tweeter which is positioned on a DMT waveguide. DMT (Directivity Matched Transition™) is QSC’s design philosophy where the high-frequency waveguide is matched to the natural conical behavior of the woofer at the crossover point. The result is a coherent transition between transducers with improved off-axis power response for consistent 135° conical DMT coverage. To retain lasting good looks, the rugged ABS baffle is further protected by using UV inhibitors that prevent discoloration and by a powder coated steel back can. The magnetic grille features a stick-on logo that can be removed blemish-free for installations where branding is not permitted.
Installers will appreciate the 3x double stepped, long travel dog-ear blind mounting system, which captures from 0" - 2.25" of ceiling thickness. A captured Phillips screw provides access to the removable conduit cover plate; also available as an accessory, as is a separate mud-ring for pre-install wiring. A locking 4-pole Euro-block connector that can accept four 18AWG pairs eliminates the termination hassles of star topology wiring designs.
- Features
Features
- Consistent tonal characteristics across the entire AcousticDesign family in both surface or ceiling applications
- DMT (Directivity Matched Transition™) waveguide ensures smooth, uniform frequency response over the coverage area
- Snap-fit magnetic grille
- 3x double stepped, long travel dog-ear blind mount system
- Advanced Intrinsic Correction voicings available via Q-SYS networked audio processing platforms, including CXD amplifiers
- Low-saturation and low-loss 70/100V transformers with 16Ω bypass
- Blemish-free removable logo
- Removable conduit cover plate, also available as accessory for pre-install wiring
- UL1480 and UL2043 certified EN54-24 Type A (pending)
- Available in black (RAL 9011) or white (RAL 9010)
- Complete EASE, CF2, CAD, & BIM information available online
- Specification
Effective Frequency Range 63 Hz – 20 kHz Rated Noise Power / Voltage 60 Watts / 31 Volts (rms) Sensitivity [dB] 88 Rated Coverage (-6 dB) 135° Conical DMT Directivity Factor (Q) 6.5 Directivity Index (DI) [dB] 8 Maximum Continuous SPL [dB] 106 Maximum Peak SPL [dB] 112 Nominal Impedance [Ohms] 16 Recommended Amplifier 120 Watts Transformer Taps / Impedance 16Ω (in Bypass Setting)
7.5W (70V); 15W (100V) Tap: 667Ω
15W (70V); 30W (100V) Tap: 333Ω
30W (70V); 60W (100V) Tap: 167Ω
60W (70V); N/A (100V) Tap: 83ΩLF Transducer 165 mm (6.5") Weather Resistant Paper Cone Woofer HF Transducer 25 mm (1") Aluminum Dome Tweeter Input Connector Type Euroblock Connector with Parallel Output Enclosure Material ABS Baffle on Powder Coated Steel Back Can Grille Material Powder Coated Steel Ingress Protection IP-34 Operating Environment Designed for Indoor Use Operating Temperature Range -20 to 50° C [-4 to 122° F] Cutout Dimension Ø 9.65" (Ø 245 mm) Included Accessories C-ring and Tile Rails, Rail Screws, Euroblock Connector, Cut-Out Template, Tether Grille Optional Accessories AD-MR6 (Pre-Install Mud Ring)
AD-CC6 (Pre-Install Conduit Cover)Safety Agency EN54-24: 2008 Type A (No. Pending)
UL1480, UL2043, NFPA90, NFPA70 Suitable For Use in Air Handling Spaces. Transformer UL Registered Per UL1876, ROHS, C-Tick X000, CE Compliant. Baffle Meets UL94-V0 and UL94-5VB Flammability Rating; in Accordance With IEC60849 / EN60849 Systems.Dimensions (Dia x L) 1.02" (280 mm) x 9.32" (237 mm) Shipping Dimensions (H x W x D) 13" (330 mm) x 29" (737 mm) x 15" (381 mm) (pair) Shipping Weight (Pair) 27.8 lbs (12.6 kg) - Documents
- Reviews
Write Your Own Review