Atlas Sound IP-SDM POE+ Wall Mount Indoor IP Speaker

with LCD Display and Talkback Microphone

AtlasIED IPX Series IP-SDM indoor wall mount IP speaker with an LCD display and talkback leverage the VoIP Communication solution to extend telepresence with enhanced audio for those environments where network-wide communication is desired and that require large speakers with high output to overcome high ambient noise areas or large spaces.

AtlasIED IP-SDM registers as a communication endpoint directly within InformaCast, and Revolution Advanced Notification applications, supporting both visual text and audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded, scheduled announcements & intercom, while leveraging the WAN/LAN Network Architecture.

When used within a Cisco Environment, these same IP speakers from AtlasIED can join Cisco’s Unified Survivable Remote Site Telephony (SRST) as a supported device within SRST endpoint Architecture. Cisco’s SRST provides remote location call-processing redundancy when access to the centralized Cisco Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination of phones and speakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).

Atlas IP speakers with display and talkback provide equality "effective communication." What does it mean for communication to be "effective?" Simply put, "effective communication" means that whatever is written or spoken must be as clear and understandable to people with disabilities as it is for people who do not have disabilities.

Where 3rd party notification applications are not required, the speakers can register as SIP devices directly to a SIP server or VoIP Communications Manager for critical alerts /public address applications and two-way communication.

Network Features:

• Dynamic or static IP address
• IEEE802.3 10/100Base-T ethernet
• IEEE 802.1q tagging
• IEEE 802.11AT compliant
• VoIP etandard audio: G.711 u-law/a-law (64 kbit/s) or G.722 wideband audio (64 kbit/s)
• Auto provisioning: DHCP option 66, 150, or TFTP server or DHCP option 72 for HTTP server
• Auto registration: SLP for InformaCast or DHCP option 72 for Revolution or GCK
• Static configuration: HTTP GUI for static configuration or Cisco SRST

Audio Features:

• Integrated amplifier 15w total power: primary speaker output 8 ohm
• Aux audio lne-in unbalanced (2.8Vpp 10K)
• Aux audio line-out unbalanced (2.8Vpp 10K)

Additional Features:

• 2 general purpose inputs
• 1 general purpose output (2A @ 30 VDC)
• Phone/night loud ringer
• External power supply option

Spec Sheet

Installation Instructions

Frequently Asked Questions