- Description
Details
JBL Control 68HP 8" High-Power Pendant Loudspeaker
The Control 68HP full-range two-way pendant loudspeaker provides high output, high power handling, superior clarity and consistent coverage in rooms with open-architecture ceilings, live spaces and other locations where a pendant loudspeaker is desired. Common applications include retail, hospitality spaces, fitness centers, convention centers, exhibit spaces, conference rooms, atriums, museums and transit centers.
Control 68HP features a 200mm (8-inch) low-frequency driver with a Kevlar-reinforced cone and a 50mm (2-inch) voice coil with fiberglass voice coil former for superior power performance and long-term reliability. A coaxially-mounted 25mm (1-inch) compression driver features a titanium dome with damped resonance and a Kapton voice coil former for enhanced long-term fidelity and output capability.
A 68-watt multi-tap transformer is included for use on 70V/100V distributed loudspeaker lines and is switchable for 8-ohm direct operation. And, its 110° constant-directivity dispersion pattern allows for the use of fewer speakers, reducing the cost of the installed system without sacrificing performance.
Installation is fast and easy with Control 68HP's secure mounting system. Two complete hanging cable systems are included, providing both main and safety suspension cables. Suspension height is infinitely adjustable using the included 4.5-meter high-tensile galvanized steel wire rope with spring clips and UL listed cable fasteners.
- Features
Features
- Coaxial design featuring: 200 mm (8 in) Kevlar™ reinforced woofer with 50 mm (2 in) voice coil, 25 mm (1.0 in) titanium-dome compression driver
- High power capability of 250 Watts (1000W peak) and high SPL of 114 dB (120 dB peak)
- Hanging hardware with 4.5 m (15 foot) galvanized steel cable and easy-to-adjust clamp
- Stylish design available in black or white
- UL listed speaker and hanging cable system
- 8 ohm and 70V/100V operation
- Extremely consistent constant-directivity 110° conical coverage
- Specification
Frequency Response (-10 dB) 52 Hz - 17 kHz Frequency Range (±3 dB) 72 Hz - 16 kHz Power Capacity 150 Watts Continuous Pink Noise Power
(600 Watts peak, 100 hrs)
250 Watts Continuous Pink Noise Power
(1000 Watts peak, 2 hrs)
500 Watts Continuous Program Power (2 hr)Nominal Sensitivity 90 dB Nominal Coverage Angle 110° conical (+30° / -30°) Rated Maximum SPL @ 1m 114 dB continuous pink noise, 120 dB peak Rated Impedance 8 ohms Transformer Taps 70V: 68W, 34W, 17W, & 8.5W
100V: 68W, 34W, 17WLF Driver 200 mm (8 in) Kevlar(tm) reinforced cone, 50 mm (2 in) CCAW voice coil on fiberglass voice coil former HF Driver 25 mm (1.0 in) compression driver, titanium dome, ferrite magnet assembly, Kapton(tm) voice coil former Enclosure Material High impact polystyrene Grille Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting) Environmental Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splashproof rating Connector Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included Suspension Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) hightensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lbs) Safety Agency Ratings Speaker listed per UL1480A Commercial and Professional Use, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®-brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81 Colors Available in black or white (-WH) Paintable Included Accessories Two suspension cable systems (see "Suspension", above), two 2-pin removable locking euro-block connectors, two rubber covers for euro-block connectors Optional Accessories MTC-PC60 top panel / terminal cover Dimensions (H x Dia) 13.6" (344 mm) x 13.1" (333 mm) Net Weight 13 lbs (5.9 kg) Shipping Weight (Pair) 31 lbs (14.1 kg) - Documents
Documents
- Reviews
Write Your Own Review
GET RELIABLE FREE SHIPPING* WITH CODE: FREESHIP
*Valid On Orders $49.99 and Up - Click Here For More Details
Quote 0 item
Recently added item(s) ×
You have no items in your quote.
Cart 0 item
Recently added item(s) ×
Your cart is empty.
