Commercial Sound Accessories

The JBL MTC-30MK marine grille kit is specifically designed for use with Control 30 and 31 series loudspeakers to prevent rusting. The aluminum grille comes with WeatherMax™ backing for superior weather protection.

The Bose ControlCenter CC-2D is a user-friendly digital wall controller in black. It features attractive styling with a single rotary encoder and circular LED ring and A/B source selection.

TOA's HY-60D series brackets are used to change the directivity angle mode of the HX-7 Series Speaker System to 60° mode. Three pieces of the HY-60D Series are required to obtain 60° mode of directivity angle.

The Electro-Voice MB200 installation kit consists of a U-bracket, two M8 x 1.25 hex-head bolts, four lock washers, two friction pads, and two 3/8-24 hex-head bolts. The kit is designed to accommodate the System 200 installation in a variety of ways.

The Bose ControlCenter CC-3D is a user-friendly digital wall controller in black. It features attractive styling with a single rotary encoder and circular LED ring and A/B/C/D source selection.

The ProCo AVP1BLK is a dual-gang wall plate mounted interface device that allows the line-level outputs of audio and videotape/cassette recorders, phonographs, etc. to be connected to microphone inputs of house P.A. systems.

The Adaptive Technologies MM-022-BT universal MultiMount speaker mount supports loudspeakers weighing up to 60 lbs/27 kgs, quickly attaching them to walls, ceilings, overhangs, and other structural surfaces. - Speaker not included

The Adaptive Technologies SAS-200-24 is an efficient, load rated universal wall arm system for mounting objects, such as loudspeakers weighing up to 200 lb/91 kg to walls and other vertical structures.

The ProCo AVP1VBLK is a dual-gang wall plate mounted interface device that allows the line-level outputs of audio and videotape/cassette recorders, phonographs, etc. to be connected to microphone inputs of house P.A. systems.

The QSC MP-MFC controller is an intuitive wall mount control to enable customizable system adjustments for the MP-M Series music and paging mixer. Designers can configure these control peripherals to provide end users with as much or as little control over the system as needed.

The Bose CVT-MA12EX is for use with either one or two MA12EX loudspeakers. Bracket included for coupling transformer to loudspeakers.

The ProCo AODDP-4XF wallplate provides one RJ45 Dante input and four Neutrik® connectors for either inputs or outputs. Using our rugged aluminum extrusion, this ProCo® AoD wallplate can provide simple connection of analog equipment to a Dante® network and provide studio-quality, low-latency audio via the XLR connectors.

The custom engineered Tannoy CMS 1201 back-can is a powder coated steel back-can that has been designed to cater for all conceivable installation possibilities for the CMS 1201 series making the CMS 1201 extremely versatile.

The ProCo AODDP-2XF2XM wallplate provides one RJ45 Dante input and four Neutrik® connectors for either inputs or outputs. Using our rugged aluminum extrusion, this ProCo® AoD wallplate can provide simple connection of analog equipment to a Dante® network and provide studio-quality, low-latency audio via the XLR connectors.

The ProCo AODDP-4XM wallplate provides one RJ45 Dante input and four Neutrik® connectors for either inputs or outputs. Using our rugged aluminum extrusion, this ProCo® AoD wallplate can provide simple connection of analog equipment to a Dante® network and provide studio-quality, low-latency audio via the XLR connectors.