Commercial Sound Accessories

The Cambridge Sound Management plastic drywall mount is used for mounting the Qt® emitters into a drywall ceiling. Compatible with both Qt Active Emitter and Qt Standard Emitter. To install the Cambridge drywall mount a 3" (7.6 cm) diameter hole is...

The Yamaha EMX7/EMX5 can be rack-mounted using an optional rack-mounting kit for optimum integration with any system or installation.

The LC1-CBB Back Box for LC1 Speakers is a sturdy metal back box designed for use with LC1 series ceiling loudspeakers. It prevents sound from traveling to adjacent areas via the ceiling cavity, and also protects the loudspeaker from dust and debris.

The LM1-TB Tile Bridge and C-Ring for LC1 (2 Pieces) from Bosch allows you to install an LC1 series ceiling loudspeaker in a drop-in tile ceiling. The bridge consists of 2 rails and spreads the weight of the speaker for safe installation. The C-ring...

The VX-2000DS emergency power supply unit supplies the DC power to each equipment in the VX-2000 system by connecting the VX-200PS power supply unit. It keeps the battery unit that contains 2 × 12 V sealed lead batteries charged compensating for...

B-Stock. Authorized Community Dealer. Factory-renewed performance and value. Returns are thoroughly inspected and tested to meet strict factory standards. Documentation and Packaging as new product. Community PMB-1RR Pole Mount Bracket The PMB‑1RR is...

The DCP4V4S Digital Control Panel is used for the MTX Series and can be used with up to 8 controllers per 1MTX with CAT5 cable. It has a max cable length up to 200m.

The MT-S0301 Matching Transformer is designed to be installed in the Line Array Speaker.

Bose ControlCenter CC-1 Zone Controller Bose ControlCenter CC-1 zone controllers provide volume control for FreeSpace®, PowerShare, and ControlSpace® products. Three models are available in either black or white and fit 1-gang electrical boxes...

The CMS 503 PI BACKCAN is an acoustically enhanced zinc plated steel back can designed for the pre-installation of CMS 503ICT PI and CMS 503DC PI loudspeakers in newly constructed, non-suspended ceilings. Early installation of the low profile back can is...

Bose ControlCenter CC-2 Zone Controller Bose ControlCenter CC-2 zone controllers provide volume and A/B source selection for FreeSpace® and ControlSpace® products. Three models are available in either black or white and fit 1-gang electrical...

Bose ControlCenter CC-3 Zone Controller The Bose ControlCenter CC-3 zone controllers provide volume and A/B/C/D source selection for ControlSpace® products. Three models are available in either black or white and fit 1-gang electrical boxes in North...

The DCP4S Wall Control Panel is used for the MTX Series and can be used with up to 8 controllers per 1MTX with CAT5 cable.

Bose ControlCenter CV41 RJ-45 4-to-1 Converter The Bose® ControlCenter CV41 converter simplifies wiring when using multiple ControlCenter CC-1 zone controllers with a PS602 or PS604 PowerShare adaptable power amplifier. The CV41 converter supports...

The Cambridge Sound Qt® Room Control Qt-RC2 can be used to adjust the sound masking level for an individual room or space. This version of the wall-mounted volume control unit is designed to work with Qt 100 Cambridge Sound Management sound masking...

The neWR-5 is a programmable Ethernet based remote control unit for all Ashly network enabled products, including NE processors, NE power amplifiers, Pema amplifiers, and nXe/nXp amplifiers. The neWR-5 offers remote control of preset recall/scroll, mute,...

Cambridge Qt Universal Ceiling or Wall Bracket The Qt Universal Bracket is a versatile and installer-friendly solution for mounting Qt Active and Standard Emitters in sound masking, paging, and music distribution systems. Designed for both wall and...

The L20-213 is a square surface mount enclosure for the APF Series Horns. It features Vandal and environment-resistant metal construction for outdoor or indoor use and comes equipped with conduit knockouts and mounting holes for easier installation.

Recessed steel backbox is undercoated to eliminate acoustic/metallic resonance and features a foam pad lining, side knockouts and flat mounting flange. Made in the USA. For use with 8 inch driver and screw-mount or torsion grille.

Recessed steel backbox for use with an 8 inch or 6.5 inch driver and screw-mount grille is undercoated to eliminate acoustic/metallic resonance. Includes foam pad lining, side knockouts, and extended lip for cutouts in sheetrock or plaster. Black finish...