Commercial Sound Accessories

TeachLogic's Infrared Dome Sensor needs to be installed on the ceiling at least 3' from the video projector. It comes with a mounting/support bracket and 50' of plenum rated cable with RCA connector...

The Ashly WR-1.5 volume control fits in standard wall boxes and used low gauge wire for hook-up. It has a single potentiometer for remote level control, plus a 4-position rotary switch for preset...

AtlasIED WPD-RISRL Volume Control Switch The WPD-RISRL is a decor style wall plate that is designed for use with the AA50PHD, AA100PHD, AA200PHD, or AA400PHD mixer amplifiers to use the remote input...

JBL MTC-RAIL Tile Rails The MTC-RAIL is a professional-grade tile rail system engineered to provide secure and stable installation of JBL 8124 and 8128 ceiling loudspeakers in 4 ft x 4 ft suspended...

JBL CSR-2SV Wall-Mounted Controller The CSR-2SV remote control allows you to remotely control source selection and volume on a JBL CSM mixer. Wired with Category 5 cable and universally accepted...

The Yamaha RKH1 is a dedicated rack-mount kit for the Yamaha MA2030 and PA2030 power amplifiers.

The easy to install and use plug-and-play MRM-70B receiver module is designed mainly to fit MIPROs wireless portable PA systems for wireless microphone applications. Other unique installations can be...

Control your system from any location with the Ashly WR-5 Programmable Multi-Function Decora Wall Remote Control. This device fits in standard wall boxes and uses low gauge wire for hook-up. WR-5 is...

The BBWP-K4 is part of the BlueBridge family of DSP products. It works in conjunction with any BlueBridge audio processor, is a four-button controller with level control that can be used to change...

The BBWP-S4K1B is part of the BlueBridge family of DSP products. The BBWP-S4K1B works in conjunction with any BlueBridge audio processor and is a four-button controller with level control that can be...

The BBWP-K1B is part of the BlueBridge family of DSP products. It works in conjunction with any BlueBridge audio processor and allows control of any single value change preset by the integrator...

The TOA SP-11N AM 900 Series SIP Module ia a VoIP phone paging module supported SIP (Session Initiation Protocol) with Auto-answer function.  It can be connected to an IP network and directly...

TOA Electronics NM-01 Noise Masking Module for TOA's 9000M2, 900, 700 and BG-2000 Series Amplifiers This module generates a noise source to be used for sound masking and audio privacy applications...

The DR6 is a fully customizable touchscreen remote for the HAL family. It supports multiple pages or tabs and any set of levels, toggles, selectors and/or commands. Drag, drop and resize controls any...

The left and right audio signals received on pairs B and C of the twisted pair cable are amplified and fed to the left and right channels of the output 3.5 mm Mini-jack. The front panel provides...

Lowell CS650-DW Combination VC and Selector Switch The CS650-DW combination volume control / source selector switch is a UL Listed 50W auto transformer for use with 70V or 25V speaker lines and...

TOA Q-SS9012PS Multi-Zone Selector The Q-SS9012PS multi-zone speaker selector has 2 amplifier inputs and 12 individual relay switches to select the amplifier connected to each 12-speaker line/zone...

The RC-20 Direct Play Remote brings instant playback through flash start to the CD-500 or CD-500B – the only CD players available with flash start capability. A set of 20 pushbuttons on the remote...

The Atlas Sound BBWP-S8B is part of the BlueBridge family of DSP products. The BBWP-S8B works in conjunction with any BlueBridge audio processor and is an eight-button controller that can be used to...

The BBWP-S4B is part of the BlueBridge family of DSP products. The BBWP-S4B works in conjunction with any BlueBridge audio processor and is a four-button controller that can be used to change any...