Back Cans

The SIN is a surface-mounting indoor back box for SVT Series models mounts to any single or double-gang back box for concealed conduit applications. CRS unit includes 0.5" conduit knockouts (three on each side; five on rear) and the Epoxy-finished...

Surface-mounting SER exterior backbox provides weatherproof installation for VT Series loudspeakers. Unit is tapped for 0.5" conduit and includes a weatherproof gasket. Housing is die-cast zinc finished in a red durable epoxy

Surface-mounting exterior backbox provides weatherproof installation for VT Series loudspeakers. Unit is tapped for 1/2" conduit and includes a weatherproof gasket. Housing is die-cast zinc finished in a durable Neutral Gray epoxy.

The ERD-8x series is a round, steel loudspeaker back box. The finish is a white baked epoxy hybrid. The back box is intended for indoor and sheltered outdoor applications.

The BX-9S Surface Mount Backbox designed for use with W-906A and W-912A In-Wall Modular Mixer/Amplifiers. Easy to use.

The JBL MTC-81BB8 is designed for use in applications requiring preinstalled backcans and is compatible with ceiling speakers having a 11.25" (286 mm) mounting circle diameter, such as the JBL 8138 ceiling loudspeaker, and the JBL MTC-81TB8 tile bridge...

The FA97-8 8 inch Recessed Enclosure With Dog Legs installs quickly and easily in plaster, drywall, or suspended tile ceilings up to 2-1/4" thick utilizing three, easy-to-adjust rotating clamps that rotate and secure into position with a screwdriver. ...

The FA97-6 6 inch Recessed Enclosure With Dog Legs is a recessed enclosure with dog legs for 6" Strategy series extra deep. FA97-6 installs quickly and easily in plaster, drywall, or suspended tile ceilings up to 2-1/4" thick utilizing three,...

The FA97-4 4 inch Extra Deep Recessed Enclosure With Dog Legs installs quickly and easily in plaster, drywall, or suspended tile ceilings up to 2-1/4" thick utilizing three, easy-to-adjust rotating clamps that rotate and secure into position with a...

The FA95-6 6 inch Recessed Enclosure With Dog Legs is an economical system enclosure with less depth than the FA97-6 model. The FA95-6 is suited for installations requiring quality voice transmission, music and signal reproduction in commercial,...

The FA95-4 4 inch Recessed Enclosure With Dog Legs is an economical system enclosure with less depth than the FA97-4 model. These Strategy Series 4" loudspeaker enclosures are acoustically-treated, front-loading units, equipped for installation in...

The E410NT 6.5 inch Deep No Torsion Tabs Enclosure was specially designed for new construction drywall applications with Atlas Sound model DLS4. All dimensions match model E410 with the omission of the internal torsion tabs to allow clearance for the...

The E410NK 6.5 inch Deep Torsion Mount Enclosure is designed for use with Atlas Sound torsion spring grilles and standard 4" (102mm) loudspeakers. All versions are constructed of 22 gauge CRS, undercoated, equipped with torsion spring receptacles, and...

The E410-11 11 inch Deep Torsion Mount Enclosure is designed for use with 4" (102mm) loudspeakers and is available with conduit knockouts to accommodate varying building code and installation requirements. This high-volume, 1/2 cubic foot (.014m3)...

The E410 6.5 inch Deep Torsion Mount Enclosure for 4 inch Speakers are designed for use with 4" (102mm) loudspeakers and are available with conduit knockouts to accommodate varying building code and installation requirements.

The EZE410 4-inch EZ Torsion Mount Enclosure accommodates a wide selection of baffles. The EZ Mount Enclosure/Rail System transfers the composite weight of the loudspeaker, baffle, and enclosure to the ceiling's support members via adjustable support...

The EZ96-8 8 inch EZ Mount Flanged Enclosure is a cost-efficient cylindrical protective enclosure that mounts a variety of Atlas Sound grilles. It features a welded CRS construction with painted finish. Units are undercoated and patch-jute lined to...

The EZ95-8 8 inch EZ Mount Recessed Enclosure is furnished with four compound combination knockouts (1/2"–3/4", 13–19mm) spaced 90° apart. One perforated strap is provided on the top of the enclosure for attachment of a secondary...

The EZ195-8 8 inch EZ Mount Flanged Torsion Enclosure transfers the composite weight of the loudspeaker, baffle, and enclosure to the ceiling’s support members via adjustable support rails (included). The rails may be adjusted vertically and then...

The EZ96-4 4 inch EZ Mount Flanged Enclosure accommodates a wide selection of baffles. The EZ Mount Enclosure/Rail System transfers the composite weight of the loudspeaker, baffle, and enclosure to the ceiling’s support members via adjustable...