Communications & Wireless
-
Attero Tech unDIO2X2+ 2x2 Channel Mic/Line I/O Dante Networked Audio Interface
The Attero Tech unDIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dante-based networked audio system. The small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.
-
Biamp HD-1 Tesira Tabletop Dialer
The Biamp Tesira HD-1 is a hardware dialer for Tesira server-class devices. The HD-1 is compatible with Tesira SERVER and SERVER-IO with STC-2 or SVC-2 cards installed, as well as all versions of the TesiraFORTÉ VT and TesiraFORTÉ VT4.
-
Atlas Sound IED1544BAS 4-Channel Backup Amplifier Switch
The Atlas Sound IED1544BAS is a backup amplifier switching module capable of switching up to four (4) speaker loads from a primary power amplifier to a backup when a failure is detected.
List $1,297.99Price $1,038.99Savings $259.00 (20%) -
Attero Tech unHX2D Dante/AES67 Networked HDMI Audio De-Embedder/Embedder Interface
The Attero Tech unHX2D is a Dante enabled HDMI de-embedder/embedder designed to bridge 2-channel PCM HDMI audio to/from a Dante/AES67 audio network. In addition, the unHX2D includes two line-level analog inputs and outputs that can be independently bridged to/from a Dante/AES67 audio network.
-
Yamaha Unified Communications RM-CR Remote Conference Processor
The Yamaha RM-CR signal processor is the heart of the RM series, it automatically recognizes connected devices on the same network for audio routing. -
Yamaha Unified Communications RM-WAP-8 Wireless Access Point for 8 ADECIA RM Series DECT Microphones
Use the Yamaha RM-WAP-8 PoE powered wireless access point to pair up to 8 RM series wireless microphones and chargers.